User manual HOTPOINT WDG 8640B EU

[. . . ] This symbol reminds you to read this instruction manual. GB GB English, 1 ES Español, 13 PT Português, 25 Contents Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data HU Magyar, 37 Description of the washer-dryer, 4-5 Control panel Display How to run a wash cycle or a drying cycle, 6 Wash cycles and options, 7 Table of programmes and wash cycles Wash options WDG 8640 Detergents and laundry, 8 Detergent dispenser drawer Preparing the laundry Special wash cycles Precautions and advice, 9 General safety Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water and electricity supplies Cleaning the washer-dryer Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Troubleshooting, 11 Service, 12 1 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washer-dryer is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. [. . . ] 11 Wash&Dry 12 Drying Cottons 13 Drying Synthetics 14 Drying Wool Rinse Spin and Pump out 8 8 The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected. For all Test Institutes: 1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 4 with a temperature of 60°C. 2) Long wash cycle for cottons: set wash cycle 5 with a temperature of 40°C. Wash options Eco The Eco option saves energy by not heating the water used to wash your laundry – an advantage both to the environment and to your energy bill. Instead, intensified wash action and water optimisation ensure great wash results in the same average time of a standard cycle. For the best washing results we recommend the usage of a liquid detergent !It cannot be used in conjunction with wash cycles 1, 2, 3, 7, 8, 9, 11, 13, 14, , . By selecting the drying function as well, an automatic drying cycle automatically activates at the end of the wash cycle – it too allows for saving energy, thanks to the optimal combination of air temperature and cycle duration. It can be activated with programmes 4 and 5. Delay Timer To set a delayed start for the selected cycle, press the corresponding button repeatedly until the required delay period has been reached. When this option is enabled, the corresponding indicator light will remain lit. To remove the delayed start setting, press the button until the text “OFF” appears on the display. This option can be used in conjunction with all cycles. 7 Detergents and laundry GB Detergent dispenser drawer Successful washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. Do not use hand washing detergents; they create too much foam. B MAX A 4 Open the detergent dispenser drawer and pour in the detergent or washing additive, as follows. Compartment 1: Prewash detergent (powder) Before pouring in the detergent, make sure that extra compartment 4 has been removed. Compartment 2: Detergent for the wash cycle (powder or liquid) If liquid detergent is used, it is recommended that the removable plastic partition A (supplied) be used for proper dosage. If powder detergent is used, place the partition into slot B. compartment 3: Additives (fabric softeners , etc. ) The fabric softener should not overflow the grid. [. . . ] If there are any cracks, it should be replaced immediately: during the wash cycles, water pressure is very strong and a cracked hose could easily split open. Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be not solved easily using the following list. GB Problem: Possible causes / Solutions: The washer-dryer does not switch • The appliance is not plugged into the socket fully, or not enough to make contact. The washer-dryer does not fill • The water inlet hose is not connected to the tap. [. . . ]