User manual HOTPOINT WMF 801

[. . . ] Instructions for use WASHING MACHINE Contents GB English, 1 GB TR Türkçe, 13 PT Português, 25 Installation, 2-3 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washing machine, 4-5 BG БЪЛГАРСКИ, 37 Control panel Display Running a wash cycle, 6 Wash cycles and options, 7 Table of programmes and wash cycles Wash options Detergents and laundry, 8 Detergent dispenser drawer Preparing the laundry Special wash cycles WMF 801 Precautions and advice, 9 General safety Disposal Opening the porthole door manually Care and maintenance, 10 Cutting off the water and electricity supplies Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Troubleshooting, 11 Service, 12 1 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features. Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. [. . . ] This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value. 2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C. This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value. 3) Long wash cycle for cottons: set wash cycle with a temperature of 40°C. 4) Long wash cycle for synthetics: set wash cycle 5 with a temperature of 40°C. Wash options Prewash If this function is selected, the pre-wash cycle will run; this is useful for removing stubborn stains. : put the detergent in the relevant compartment. It cannot be used in conjunction with wash cycles 6, 8, 9, 10, 12, 13, 14, , . 7 Detergents and laundry GB Detergent dispenser drawer Successful washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. Use powder detergent for white cotton garments, for prewashing, and for washing at temperatures over 60°C. Follow the instructions given on the detergent packaging. Do not use hand washing detergents; they create too much foam. B MAX Special wash cycles Anti Stain: the programme 1 is suitable to heavily-soiled garments with resistant colours. It ensures a washing class that is higher than the standard class (A class). When running the programme, do not mix garments of different colours. we recommend the use of powder detergent. Pre-treatment with special additives is recommended if there are obstinate stains. Whites: use this cycle 2 to wash white clothes. The programme is designed to maintain the brightness of white clothes over time. anti allergy: use programme 6 to remove major allergens such as pollen , mites , cat’s and dog’s hair. [. . . ] Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be not solved easily using the following list. gB Problem: The washing machine does not switch on. Possible causes / Solutions: • The appliance is not plugged into the socket fully, or not enough to make contact. The washing machine does not fill • The water inlet hose is not connected to the tap. [. . . ]