User manual HOTPOINT XF 995.3

[. . . ] We recommend that you read this manual for best performance and to extend the life of your appliance. Knob for selecting the cooking features. Knob for adjusting the cooking temperature. Analogue programmer for Start/End cooking time E. [. . . ] 2nd example: start with manual cooking mode - end with programmed cooking mode. €¢ Put the food to be cooked in the oven. Key (end of cooking) and adjust the end • Press the of cooking time using the - and + keys: the oven switches on, the AUTO and symbols light up. €¢ Turn the selector and the thermostat knobs onto the required function and temperature respectively. €¢ At the end of cooking, the oven is automatically switched off, the symbol (oven on) goes out and the AUTO symbol blinks; an acoustic signal sounds. Automatic oven mode (programmed cooking duration and end) • Put the food to be cooked in the oven. €¢ Press the key (Duration) and adjust the cooking time using the - and + keys: the AUTO and (oven on) symbols light up (the oven switches on). €¢ Press the key (end of cooking) and adjust the end of cooking time using the - and + keys: the symbol goes out (the oven switches off). €¢ Turn the selector and the thermostat knobs onto the required function and temperature respectively. €¢ The programmer automatically sets the start of cooking time, which is shown by the symbol (oven on) coming on. When the cooking time has elapsed, the oven is automatically switched off, the (oven on) symbol goes out and the AUTO symbol blinks; an acoustic signal sounds. Minute minder Press the key (minute minder) and set the time required using the - and + keys. An acoustic signal sounds at the end of the programme. Buzzer The buzzer emits a sound for 7 minutes after the end of the selected programme; it may be stopped by pressing any function key. It is possible to choose 3 different types of acoustic signal. By pressing the - key the actual signal tone appears. Now, within 7 seconds, every further press of the - key changes the signal tone. Program control Press the key for the remaining time to be displayed, and the key to check the end of cooking time. Erasing programs Once a programme has been carried out, it is automatically erased; it can also be cancelled by pressing the key (manual). 3) Programmed Cooking Time - Immediate Start 1 Turn the knob in the counter-clockwise direction until the Total Cooking Time desired appears in the small time display. 2 Pull the knob and turn it in the counter-clockwise direction until the marker is aligned with the current time. a click indicates that the procedure has been completed. [. . . ] Safety Is A Good Habit To Get Into • • This appliance is designed for non-professional, household use and its functions must not be changed. These instructions are only valid for the countries whose symbols appear on the manual and the serial number plate. The electrical system of this appliance may be used safely only when it is correctly connected to an efficient earthing system in complaince with the safety standards currently in effect. The manufacturer will not be held liable for any damages that might arise out of incorrect installation or improper, incorrect or unreasonable use of the appliance. [. . . ]