User manual HOTPOINT XF 995.3 /HA

[. . . ] 11 Operating Instructions OVEN GB IT Italiano, 1 GB English, 12 FR Français, 22 Contents Installation, 13-14 Installation of Built-in Ovens Fastening the oven Electrical connections Data plate ES Espanol, 32 PT Portuges, 42 Description of the appliance, 15 Overall view Control panel Start-up and use, 17-19 Starting the oven Timer Cooking modes Practical cooking advice Cooking advice table XF 995. 3 / HA Precautions and tips, 20 General safety Disposal Respecting and conserving the environment Assistance Maintenance and care, 21 Switching the appliance off Cleaning the appliance Cleaning the oven door Installation Important: The power supply to the appliance must be cut off before any adjustments or maintenance work is done on it. Installation of Built-in Ovens To ensure the proper working order of the built-in appliance, the kitchen unit must be of a suitable size. The sizes of the unit for installing the cooker under a worktop or in a column unit are shown in figure. [. . . ] " Start the motor by turning the knob to the grill setting . Analogue Programmer for Start/End Cooking Time (D) GB How to Reset the Current Time The oven must be connected to the power supply. Press the knob and turn it in the counter-clockwise direction until the correct time appears. nB: The programmer runs on electricity. Therefore, it will stop during a power outage for the entire length of time that the power is off. After the power comes back on, the current time will have to be set again. Manual Operation NB: This mode should be used when the cooking time does not need to be programmed. Turn the knob in the counter-clockwise direction until symbol appears in the small window. Pull the knob and turn it in the counter-clockwise direction until the marker is aligned with the current time. a click indicates that the procedure has been completed. Use the oven knob to select the desired cooking program. To turn the oven off, turn the knob to the "0" setting. programmed Cooking Time - Immediate Start 1. Turn the knob in the counter-clockwise direction until the Total Cooking Time desired appears in the small time display. Pull the knob and turn it in the counter-clockwise direction until the marker is aligned with the current time. a click indicates that the procedure has been completed. Use the oven knob to select the desired cooking program. The oven will turn on immediately and stay on for the entire length of the programmed cooking time. The oven will buzz to indicate that it has automatically turned off. To interrupt the programmed cooking time, turn the knob in the counter-clockwise direction until the symbol appears in the small window. programmed Cooking Time - Delayed Start 1. Total Cooking Time: Turn the knob in the counter-clockwise direction until the Total Cooking Time desired appears in the time display. [. . . ] ) • serial number (S/N) This information is found on the data plate located on the appliance and/or on the packaging. 20 Maintenance and care Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Inspecting the seals Check the door seals around the oven periodically. If the seals are damaged, please contact your nearest After-sales Service Centre (see Assistance). [. . . ]