User manual HP C9730A QUICK GUIDE

[. . . ] HEWLETT-PACKARD SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information. Trademark Credits PostScript® is a trademark of Adobe Systems Incorporated which may be registered in certain jurisdictions. Arial, Monotype, and Times New Roman are U. S. [. . . ] Make sure the line voltage is correct for the printer's power configuration. (See the plate next to the power receptacle on the back of your printer for voltage requirements. ) If you are using a power strip and its voltage is not within specification, plug the printer directly into the power receptacle. Press all the keys to see if one is stuck; contact your HP service representative if this does not work. Display is blank and internal fans are not running. Determining Printer Problems Chapter 5 Problem Solving 190 Blank or Garbled Control Panel Display (continued) Printer display is in the wrong language or displays unfamiliar characters. Reconfigure the control panel display language. See the getting started guide. Printer Cannot Print Configuration Page Check to see if. . . Toner cartridge sealing tape is not removed. Solution Check paper trays to be sure the correct sizes are loaded (Letter or A4). Also, check that guides are set correctly. Remove sealing tape from toner cartridge. See the printer's getting started guide or the installation guide that came with the toner cartridge. Firmly close the printer top cover and all doors (left, front, and right). z Complex print job may still be processing. Make sure control panel reads processing job. Pull out the toner cartridge and check for paper. Ensure that the appropriate paper is inserted. (For more information on paper specifications, see page 256. ) Close the trays. Last page did not print and the Data light is on. Determining Printer Problems Chapter 5 Problem Solving 193 Print Job Does Not Print (continued) Data light is flashing but nothing prints. z Ensure that you are using the correct printer driver. z Complex print job may still be processing. Make sure control panel reads processing job. Pull out the toner cartridge and check for paper. Ensure that the appropriate paper is inserted. (For more information on paper specifications, see page 256. ) Close the trays. Print Speed is Too Slow Situation First page takes much longer to print than following pages. [. . . ] For product take-back information, contact your local HP Sales and Service Office (page 245). Paper The printer is suited for the use of recycled papers when the paper meets the guidelines outlined in the HP LaserJet Printer Family Paper Specifications Guide. The printer is suited for the use of recycled paper according to DIN 19 309. It is advisable to place printers with a sound power level of Lwad of 6. 3 Bel (A) or higher into a separate or divided up room. 348 Acoustics Environmental Conformity Appendix E Regulatory Information 349 Declaration of Conformity according to ISO/IEC Guide 22 and EN45014 Manufacturer's Name: Manufacturer's Address: Hewlett-Packard Company 11311 Chinden Boulevard Boise, Idaho 83714-1021, USA declares, that the product Product Name: Model Numbers: Product Options: HP LaserJet 8000, 8000 N, 8000 DN, HP Mopier 240 C4085A, C4086A, C4087A, C4228A ALL conforms to the following Product Specifications: Safety: IEC 950:1991+A1+A2+A3 / EN 60950:1992+A1+A2+A3 IEC 825-1:1993 / EN 60825-1:1994 Class 1 (Laser/LED) Declaration of Conformity Appendix E Regulatory Information EMC: 1 CISPR 22:1993+A1 / EN 55022:1994 Class B ) 350 CISPR 22:1993+A1 / EN 55022:1994 Class A EN 50082-1:1992 IEC 801-2:1991 / prEN 55024-2:1992 IEC 801-3:1984 / prEN 55024-3:1991 IEC 801-4:1988 / prEN 55024-4:1992 4 kV CD, 8 kV AD 3 V/m 0. 5 kV Signal Lines 1. 0 kV Power Lines 2 1 FCC Title 47 CFR, Part 15 Class B ) / ICES-003, Issue 2 / VCCI-B ) 1 AS / NZS 3548:1992 / CISPR 22:1993 Class B ) Supplementary Information: The product herewith complies with the requirements of the following Directives and carries the CE-marking accordingly: the EMC directive 89/336/EEC Declaration of Conformity Appendix E Regulatory Information the Low Voltage Directive 73/23/EEC The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems. [. . . ]