User manual HP COMPAQ MINI 210 MAINTENANCE AND SERVICE GUIDE

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HP COMPAQ MINI 210. We hope that this HP COMPAQ MINI 210 user guide will be useful to you.

Lastmanuals help download the user guide HP COMPAQ MINI 210.


HP COMPAQ MINI 210 MAINTENANCE AND SERVICE GUIDE: Download the complete user guide (3602 Ko)

Manual abstract: user guide HP COMPAQ MINI 210MAINTENANCE AND SERVICE GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] HP Mini 2102, HP Mini 210, and Compaq Mini 210 Maintenance and Service Guide © Copyright 2009 Hewlett-Packard Development Company, L. P. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. [. . . ] If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the service cover (see Service cover on page 40). Remove the keyboard: 1. Remove the three Phillips PM2. 0×6. 0 screws that secure the keyboard to the computer. 2. Slide the keyboard (2) back until the keyboard cable and connector are accessible. 50 Chapter 4 Removal and replacement procedures 6. Release the zero insertion force (ZIF) connector (3) to which the keyboard cable is attached, and then disconnect the keyboard cable (4) from the system board. 7. Remove the keyboard. Reverse this procedure to install the keyboard. Component replacement procedures 51 Top cover Description In black In blue In red In silver Spare part number 589676-001 589688-001 589687-001 589686-001 Before removing the top cover, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the keyboard (see Keyboard on page 49). Remove the top cover. Remove the six Phillips PM2. 0×6. 0 screws (1) and the Phillips PM2. 5×4. 0 screw (2) that secure the top cover to the base enclosure. 3. Disconnect the speaker cable (1) from the system board. 52 Chapter 4 Removal and replacement procedures 6. Release the ZIF connector (2) to which the TouchPad cable is connected, and then disconnect the TouchPad cable (3) from the system board. 7. Remove the five Phillips PM2. 0×6. 0 screws that secure the top cover to the base enclosure. 8. Release the top cover (1) by lifting the rear edge until it disengages from the base enclosure. Component replacement procedures 53 9. Remove the top cover (2) by lifting it straight up. Reverse this procedure to install the top cover. 54 Chapter 4 Removal and replacement procedures Speakers Description Speakers (include cables) Spare part number 596153-001 Before removing the speakers, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. (The TouchPad cable is attached to the top cover with double-sided adhesive). Release the speaker cable from the clips (2) built into the TouchPad bracket. Remove the two Phillips PM2. 0×4. 0 screws (3) that secure the speakers to the top cover. Remove the speakers (4). Reverse this procedure to install the speakers. Component replacement procedures 55 TouchPad Description For use only with a black top cover For use only with a blue top cover For use only with a red top cover For use only with a silver top cover Spare part number 589677-001 589685-001 589684-001 589683-001 Before removing the TouchPad, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. (The TouchPad cable is attached to the top cover with double-sided adhesive). Remove the two Phillips PM2. 0×4. 0 screws (2) that secure the TouchPad bracket to the top cover. Release the TouchPad (4) by lifting the front edge until it rests at an angle. 56 Chapter 4 Removal and replacement procedures 6. Remove the TouchPad (5) by sliding it forward. Reverse this procedure to install the TouchPad. Component replacement procedures 57 Display assembly Description Spare part number 10. 1-in display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers and cables, and webcam/microphone module and cable): For use only with HP Mini 2102 and 210 computer models: HD, AntiGlare, flush glass display assembly in black HD, AntiGlare, flush glass display assembly in blue HD, AntiGlare, flush glass display assembly in red HD, AntiGlare, flush glass display assembly in silver HD, AntiGlare, standard display assembly in black WSVGA, AntiGlare, flush glass display assembly in black WSVGA, AntiGlare, flush glass display assembly in blue WSVGA, AntiGlare, flush glass display assembly in red WSVGA, AntiGlare, flush glass display assembly in silver WSVGA, AntiGlare, standard display assembly in black WSVGA, AntiGlare, standard display assembly in silver 589648-001 589646-001 589644-001 589642-001 589650-001 589647-001 589645-001 589643-001 589641-001 589649-001 589651-001 589640-001 10. 1-in, WSVGA, AntiGlare, standard display assembly in black for use only with Compaq Mini 210 computer models Before removing the display assembly, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. [. . . ] Follow the local laws and regulations in your area for computer battery disposal. Display WARNING!Caution must be exercised when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. CAUTION: The procedures in this chapter can result in damage to display components. The only components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP COMPAQ MINI 210

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP COMPAQ MINI 210 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag