User manual HP COMPAQ PRESARIO M2001EA

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HP COMPAQ PRESARIO M2001EA. We hope that this HP COMPAQ PRESARIO M2001EA user guide will be useful to you.

Lastmanuals help download the user guide HP COMPAQ PRESARIO M2001EA.


HP COMPAQ PRESARIO M2001EA : Download the complete user guide (4142 Ko)

Manual abstract: user guide HP COMPAQ PRESARIO M2001EA

Detailed instructions for use are in the User's Guide.

[. . . ] Maintenance and Service Guide HP Pavilion ze2000 Notebook PC Compaq Presario M2000 Notebook PC Document Part Number: 377608-002 July 2005 The information and procedures included in this Maintenance and Service Guide apply to HP Pavilion ze2000 Notebook PC and Compaq Presario M2000 Notebook PC models equipped with Intel processors. This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides comprehensive information on identifying computer features, components, and spare parts; troubleshooting computer problems; and performing computer disassembly procedures. © Copyright 2005 Hewlett-Packard Development Company, L. P. Intel, Pentium, Celeron, and Centrino are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. [. . . ] Use conductive field service tools, such as cutters, screwdrivers, and vacuums. When using fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe materials. Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and Styrofoam. Handle electrostatic-sensitive components, parts, and assemblies by the case or PCM laminate. Turn off power and input signals before inserting or removing connectors or test equipment. 4. 7 Grounding Equipment and Methods Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors, use alligator clips to connect a wrist strap. Foot straps (heel, toe, or boot straps) can be used at standing workstations and are compatible with most types of shoes or boots. On conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one megohm resistance between the operator and ground. To be effective, the conductive strips must be worn in contact with the skin. 4­6 Maintenance and Service Guide Removal and Replacement Preliminaries Other grounding equipment recommended for use in preventing electrostatic damage includes: Antistatic tape Antistatic smocks, aprons, and sleeve protectors Conductive bins and other assembly or soldering aids Nonconductive foam Conductive tabletop workstations with ground cords of one megohm resistance Static-dissipative tables or floor mats with hard ties to the ground Field service kits Static awareness labels Material-handling packages Nonconductive plastic bags, tubes, or boxes Metal tote boxes Electrostatic voltage levels and protective materials Maintenance and Service Guide 4­7 Removal and Replacement Preliminaries Table 4-1 shows how humidity affects the electrostatic voltage levels generated by different activities. Table 4-1 Typical Electrostatic Voltage Levels Relative Humidity Event Walking across carpet Walking across vinyl floor Motions of bench worker Removing DIPS from plastic tube Removing DIPS from vinyl tray Removing DIPS from Styrofoam Removing bubble pack from PCB Packing PCBs in foam-lined box 10% 35, 000 V 12, 000 V 6, 000 V 2, 000 V 11, 500 V 14, 500 V 26, 500 V 21, 000 V 40% 15, 000 V 5, 000 V 800 V 700 V 4, 000 V 5, 000 V 20, 000 V 11, 000 V 55% 7, 500 V 3, 000 V 400 V 400 V 2, 000 V 3, 500 V 7, 000 V 5, 000 V A product can be degraded by as little as 700 V. Table 4-2 lists the shielding protection provided by antistatic bags and floor mats. Table 4-2 Static-Shielding Materials Material Antistatic plastic Carbon-loaded plastic Metallized laminate Use Bags Floor mats Floor mats Voltage Protection Level 1, 500 V 7, 500 V 5, 000 V 4­8 Maintenance and Service Guide 5 Removal and Replacement Procedures This chapter provides removal and replacement procedures. There are are as many as 63 screws, in 10 different sizes and types, that may have to be removed, replaced, or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Refer to Appendix C, "Screw Listing, " for detailed information on screw sizes, locations, and usage. Maintenance and Service Guide 5­1 Removal and Replacement Procedures 5. 1 Serial Number Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is located on the bottom of the computer. Serial Number Location 5­2 Maintenance and Service Guide Removal and Replacement Procedures 5. 2 Disassembly Sequence Chart Use the chart below to determine the section number to be referenced when removing computer components. Disassembly Sequence Chart Section 5. 3 Description Preparing the Computer for Disassembly Battery pack 5. 4 Hard Drive 0 2 loosened to remove the hard drive cover 4 to disassemble the hard drive 0 1 2 loosened 1 loosened # of Screws Removed 5. 5 5. 6 5. 7 5. 8 Computer Feet Optical Drive Memory Module Mini PCI Communications Module Ä To prevent an unresponsive system and the display of a warning message, install only a Mini PCI device authorized for use in your computer by the governmental agency that regulates wireless devices in your country. If you install a device and then receive a warning message, remove the device to restore computer functionality. 2 2 4 5. 9 5. 10 5. 11 Keyboard Cover LED Board Keyboard Maintenance and Service Guide 5­3 Removal and Replacement Procedures Disassembly Sequence Chart (Continued) Section 5. 12 5. 13 5. 14 5. 15 5. 16 5. 17 5. 18 5. 19 5. 20 5. 21 5. 22 Description Display Assembly Base Enclosure Speaker Assembly Heat Sink Fan Processor Battery Connector Board Power Connector Board USB/S-Video Controller Board Bluetooth Board System Board # of Screws Removed HP Pavilion ze2000 = 4 Compaq Presario M2000 = 6 HP Pavilion ze2000 = 23 Compaq Presario M2000 = 21 0 3 2 0 2 2 2 2 HP Pavilion ze2000 = 2 Compaq Presario M2000 = 3 5­4 Maintenance and Service Guide Removal and Replacement Procedures 5. 3 Preparing the Computer for Disassembly Before you begin any removal or installation procedures: 1. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system. Battery Pack Spare Part Number Information 12-cell, 8. 8-AHr 6-cell, 4. 4-AHr 6-cell, 4. 0-AHr 367760-001 367759-001 398065-001 4. Turn the computer upside down with the front panel toward you. Maintenance and Service Guide 5­5 Removal and Replacement Procedures b. Remove the battery pack. Removing the Battery Pack Reverse the above procedure to install the battery pack. 5. 4 Hard Drive Hard Drive Spare Part Number Information 80-GB (4200-rpm; includes frame and connector) 60-GB (4200-rpm; includes frame and connector) 40-GB (4200-rpm; includes frame and connector) 381398-001 381397-001 381396-001 5­6 Maintenance and Service Guide Removal and Replacement Procedures 1. Loosen the two black PM2. 0×5. 0 screws 1 that secure the hard drive cover to the computer. [. . . ] All screws listed in this appendix are available in the Miscellaneous Screw Kits, spare part numbers 382402-001 (for use on HP Pavilion ze2000 models) and 382403-001 (for use on Compaq Presario M2000 models). Table C-1 Phillips PM2. 5×4. 0 Screw Head Width 4. 0 mm mm Color Silver Qty. 4 Length 4. 0 mm Thread 2. 5 mm Where used: 4 screws that secure the hard drive frame to the hard drive (documented in Section 5. 3) Phillips PM2. 5×4. 0 Screw Locations Maintenance and Service Guide C­1 Screw Listing Table C-2 Black Phillips PM2. 0×5. 0 Screw Head Width 4. 0 mm mm Color Black Qty. 5 Length 5. 0 mm Thread 2. 0 mm Where used: 1 Two screws that secure the hard drive cover to the computer (screws are captured on the cover by C clips; documented in Section 5. 3) 2 Two screws that secure the memory module compartment cover to the computer (screws are captured on the cover by C clips; documented in Section 5. 7) 3 One screw that secures the Mini PCI compartment cover to the computer (screw is captured on the cover by C clips; documented in Section 5. 8) Black Phillips PM2. 0×5. 0 Screw Locations C­2 Maintenance and Service Guide Screw Listing Table C-3 Phillips PM2. 0×6. 0 Screw Head Width 4. 0 mm mm Color Black Qty. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP COMPAQ PRESARIO M2001EA

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP COMPAQ PRESARIO M2001EA will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag