User manual HP DESIGNJET T1300

[. . . ] 3rd edition Legal notices The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. [. . . ] Printing in color You can adjust the colors of your print in similar ways under Windows and Mac OS: ● ● ● In the Windows driver dialog: select the Color tab, ensure that the Advanced color adjustments box is checked, then press the Settings button beside it. In the Mac OS Print dialog (non-PostScript printers): select the Color Options panel, select Color from the Mode list, then press the Adjust button. In the Mac OS PostScript Print dialog (PostScript printers): select the Color Options panel, select Color from the Mode list, then press the Adjust button. Under either operating system, you will then be able to make adjustments using a lightness slider and three color sliders. ENWW Color management from printer drivers 89 ● ● The lightness slider simply makes the whole print lighter or darker. The color sliders can be used to fade or emphasize each of the primary colors in the print. The primary colors may be red, green and blue; or cyan, magenta and yellow; depending on the color model used in the image. The Reset button restores each slider to its default central position. Printing in grayscale You can convert all colors in your image to shades of gray in the following ways: ● ● In your application program: many programs provide this option. In the Windows driver dialog: go to the Color tab and look at the Color Options section. You can also select Print in pure black and white if you want only black and white, without gray shades. In the Mac OS Print dialog (non-PostScript printers): go to the Color Options panel and select Grayscale from the Mode drop-down list. You can also select Pure Black and White if you want only black and white, without gray shades. In the Mac OS PostScript Print dialog (PostScript printers): go to the Color Options panel and select Grayscale from the Mode drop-down list. You can also select Pure Black and White if you want only black and white, without gray shades. On the Embedded Web Server's Submit Job page (T1300 series): select Color, then set Color/Grayscale to Print In Grayscale. You can also select Pure Black and White if you want only black and white, without gray shades. — ● ● You can adjust the gray balance of your print in similar ways under Windows and Mac OS: ● ● ● In the Windows driver dialog: select the Color tab, ensure that the Advanced color adjustments box is checked, then press the Settings button beside it. In the Mac OS Print dialog (non-PostScript printers): select the Color Options panel, select Grayscale from the Mode list, then press the Adjust button. In the Mac OS PostScript Print dialog (PostScript printers): select the Color Options panel, select Grayscale from the Mode list, then press the Adjust button. Under either operating system, you will then be able to make adjustments using separate controls for highlights, midtones and shadows. 90 Chapter 10 Color management ENWW ● ● ● The lightness slider simply makes the whole print lighter or darker. [. . . ] Jetdirect HP's brand name for its series of print servers that allow a printer to be connected directly to a local area network. LED Light-Emitting Diode: a semiconductor device that emits light when electrically stimulated. MAC address Media Access Control address: a unique identifier used to identify a particular device on a network. it is a lowerlevel identifier than the IP address. [. . . ]