User manual HP DESIGNJET Z5200

[. . . ] 1st edition Legal notices The information contained herein is subject to change without notice. The only warranties for HP Products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. [. . . ] Choose an appropriate paper type for the purpose. The paper type should be calibrated and profiled with the printer and the print-quality level that you intend to use. see Color calibration on page 66 and Color profiling on page 67. For a correct preview of the printed image, the monitor should also be profiled. — ● ● ● ● Make sure that More Options are displayed. From the File menu, select Open to open the image. — If the document has an embedded color profile that does not match the current working space, select Use the embedded profile. Otherwise, select Assign working space; in this case, if the displayed image does not look correct, try assigning it to other color spaces with Edit > Assign Profile (try sRGB, Adobe RGB, ColorMatch RGB and others) until you are satisfied. From the File menu, select Print with Preview. — ◦ ◦ ◦ ● ● ● Format for: select the printer (for example, HP Designjet Z5200ps Photo). Paper Size: select the size of the paper that is currently loaded into the printer. Orientation: select the orientation of your image on the paper. Set the Position and the Scaled Print Size you need. Make sure that More Options are displayed. Options > Printer Profile: select the right profile for your printer and paper type. — ● Printer: select the printer (for example, HP Designjet Z5200ps Photo). select Paper/Quality from the drop-down menu. — ◦ ● Paper Type: select the paper type that is currently loaded into the printer (or Any). ENWW Color management scenarios 79 Color management Color management 80 Print a black-and-white photo for an exhibition (Photoshop, PS driver) This example uses Adobe Photoshop CS4 under Windows, with the PostScript driver. The color management is done by the printer's internal PostScript RIP. NOTE: Application-managed colors could be used in this example, exactly as in the previous example. However, printer-managed colors will be used this time, in order to illustrate both methods of color management. [. . . ] Also, avoid working in low humidity environments. Ethernet A popular computer networking technology for local area networks. Firmware Software that controls your printer's functionality and is stored semi-permanently in the printer (it can be updated). gamut The range of colors and density values reproducible on an output device , such as a printer or monitor. [. . . ]