User manual HP DF300 DATASHEET

[. . . ] You can purchase the adaptor at retail outlet stores that sell memory cards. Store Remote Control You can avoid misplacing the remote control by safely storing it on the back of the DPF when not in use. The top back of the remote control has a builtin magnet and the back of the DPF has a `magnetic area' so you can simply attach the remote control to the back of the DPF for safe keeping. (The memory card slots, ports, and jacks in your DPF may be different than those pictured here. [. . . ] You can play a slideshow of the photos stored in the DPF's internal memory by simply powering on the DPF (with no external media source inserted) and then wait for the slideshow to automatically begin. Insert an external media source and then power on the DPF; the slideshow will begin displaying your photos. If you insert a media source after power on, a memory card option screen is displayed; select Start Slideshow. There are five category folders in the internal memory into which you can assign photo files for personalized organization and slideshows (these folder names cannot be changed): Only photos stored in the internal memory can be assigned to the slideshow folders. Assigned photos are not physically moved or copied into the folders, rather, a link is assigned to the photo so it appears to be located in the folder. If you delete the actual photo file from internal memory, the link to the folder will also be deleted. On the Photo Thumbnails screen, use to scroll through your photos. Select Assign to Folder, and then select the desired folder into which you want to assign the photos. Play Slideshow from Slideshow Folder Select the desired folder containing the photos you want to view in your slideshow. After assigning photos to folders you can copy those photos to other folders, or you can reassign photos to appear in a different folder. With the slideshow folders slideshow playing (per above instructions), press To copy or reassign an individual photo, highlight the desired photo and then press To copy or reassign multiple photos, use select those that you want to copy or reassign ( deselects), and then press To scroll through the photos, use Select Copy to Folder or Reassign to Folder, and then select the desired folder into which you want to reassign or copy the photos. WARNING: Do not unplug or switch off the DPF when files are being transferred, as that can seriously damage the memory. When the message "This device can now be safely removed from the computer" appears, you can disconnect the USB cable from your computer. Select the storage device corresponding with the DPF, and then click Stop to disconnect. When the message "It is now Safe to Disconnect Hardware" appears, you can disconnect the USB cable from your computer. Use a USB cable to connect the DPF to your Macintosh computer. Drag and drop files between the two devices as you normally move files. To safely disconnect the DPF from your Macintosh, select DPF's icon on your desktop and press Command-e to eject the disk. When the icon is no longer on the desktop, it is safe to unplug the USB cable. The DPF will stay on until you power it off, however, to save power you can set it to automatically go into a sleep mode when left idle for a specific amount of time. OFF (default) = Power saver is `disabled'; DPF will remain on until you power it off or change the sleep mode setting 2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the specified amount of time 3. Depending on model, this DPF may include multiple languages for the user interface display. [. . . ] During the warranty period, if a defective HP Product covered by this Limited Warranty is returned to the designated HP Service Center, it will be repaired or replaced, at the option of the Service Center, or its purchase price will be refunded. No repair, replacement or refund will be provided unless the defective HP Product is returned to the Service Center at your expense; for some HP Products, no return will be accepted unless the Service Center first provides you with a Return Material Authorization (RMA). If your HP Product has recurring failures, at the option of the Service Center, either you will be furnished with a different product that is equivalent in performance or you will receive a refund of your purchase price. Service Center support may be provided by an HP subcontractor or other third parties. [. . . ]