User manual HP EP9010 INSTANT CINEMA DIGITAL PROJECTOR

[. . . ] HP ep9010 Series Instant Cinema Digital Projector User's Guide © Copyright 2004 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] Press menu on the projector or remote control. Press up or down to highlight the desired menu icon, then press right to move into that menu. Press up or down to highlight that setting, then press ok to begin adjusting the setting. Press left or right , or press up or down , to adjust the setting, as prompted. To go to a different menu, press left and select a menu. To close the on-screen menu, press menu. If you do nothing for a period of time, the on-screen menu closes. To change the amount of time until the on-screen menu closes, press menu and select Setup > Timeout for menu. To exit from any on-screen menu or adjustment, press the menu button. 46 User's Guide Adjusting the projector Input menu For a visual aid, see "Back panel" on page 12. Input menu Internal DVD Component S-Video Composite DVI Shows the video from the internal DVD player. Shows the source connected to the component-video port (YPbPr). Shows the source connected to the S-video port. Shows the source connected to the composite-video port. Shows the source connected to the DVI port. Picture menu Some picture adjustments are available only when certain input ports are in use. Unavailable adjustments are shown in gray in the on-screen menu. Picture menu Color settings. . . Brightness Contrast Sharpness Color saturation Tint Color space Reset color settings Shape settings. . . Keystone Adjusts the picture and colors. Sets the difference between light and dark areas. For certain component inputs, selects the type of color standard used by the source. Restores these color settings to their default settings. Corrects the slanted sides of the picture. This compensates for a projector that is too high or low relative to the screen. Resets the keystone correction to zero (no correction). Reset keystone User's Guide 47 Adjusting the projector Picture menu (Continued) Widescreen input VGA settings. . . Auto-sync Frequency Tracking Vertical offset Horizontal offset Picture Mode Sets whether a widescreen (16:9) input device is in use. [. . . ] Connecting the digital projector's power cord to another power outlet. Connections to peripheral devices To maintain compliance with FCC Rules and Regulations, use properly shielded cables with this device. For more information, consult your dealer, an experienced radio/television technician, or, prepared by the Federal Communications Commission, How to Identify and Resolve Radio-TV Interference Problems. Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4. At the first printing of this manual, the telephone number was 202-512-1800. User's Guide 73 Reference Canada This Class B digital apparatus complies with Canadian ICES-003. Japan Korea International For regulatory identification purposes, your product is assigned a regulatory model number. [. . . ]