User manual HP ipaq 214 enterprise handheld ipaq 200 series enterprise handheld - product guide

[. . . ] HP iPAQ Product Guide © Copyright 2008 Hewlett-Packard Development Company, L. P. HP iPAQ products are powered by Microsoft® Windows Mobile® 6. 0 Classic with Messaging and Security Feature Pack. Microsoft Windows, the Windows logo, Outlook, and ActiveSync/Windows Mobile Device Center are trademarks of Microsoft Corporation in the U. S. and other countries. TM SD Logo is a trademark of its proprietor. [. . . ] Scroll and select the Internet e-mail option from the Your e-mail provider list and tap Next. Enter your name and required account name and tap Next. Enter the incoming server name and select the required account type, POP3 or IMAP4. You can also perform the following functions: Change the time intervals for downloading new messages. Limit the number of messages that are downloaded. Description Enter the user name assigned to you by your ISP or network administrator. This is often the first part of your e-mail address, which is displayed before the at sign (@). You have the option to save your password so that you do not need to enter it each time you connect to your e-mail server. Not required for an account with an ISP. Enter a unique name for the account, such as Work or Home. Enter the name of your e-mail server (POP3 or IMAP4). Enter the name of your outgoing e-mail server (SMTP). Select this to ensure you always send e-mail from this account using an SSL connection. This enables you to send personal information more securely. Note that if you select this and your ISP does not support an SSL connection, you might not be able to send e-mail. Select this if your outgoing e-mail server (SMTP) requires authentication. Your user name and password from above is used. Select this if your outgoing e-mail server requires a different user name and password than the ones you entered before. Configure these settings to ensure that your outgoing e-mail messages are delivered. Enter your user name for the outgoing e-mail server. Enter your password for the outgoing e-mail server. Setting User name Password Domain Account type Account name Incoming mail Outgoing mail Require SSL connection Outgoing mail requires authentication Use separate settings Outgoing server settings User name Password 34 Chapter 8 Messaging Setting Domain Require SSL for outgoing mail Description Enter the domain of the outgoing e-mail server. Select this to ensure you always send e-mail from this account using an SSL connection. This enables you to send personal information more securely. Note that if you select this and your ISP does not support an SSL connection, you might not be able to send e-mail. TIP: You can set up several e-mail accounts in addition to your Outlook e-mail account but you cannot add a new account while connected. [. . . ] What should I do? If you have trouble charging your battery, please perform the following checks: Is the battery charger correctly plugged into the battery charger socket on the HP iPAQ?Is the power cord of the charger damaged?If yes, replace with a new battery and try again. NOTE: To locate information about batteries, visit http://www. hp. com/accessories/ipaq. 82 Chapter 19 Frequently asked questions I am unable to use the ActiveSync feature. [. . . ]