User manual HP LASERJET 5100

[. . . ] use hp LaserJet 5100 5100tn 5100dtn hp LaserJet 5100, 5100tn, and 5100dtn series printers use guide © Copyright Hewlett-Packard Company 2002 All Rights Reserved. Except as allowed by copyright laws or herein, reproduction, adaptation, or translation without prior written permission is prohibited. A user of the Hewlett-Packard printer associated with this use guide is granted a license to: a) print hard copies of this use guide for PERSONAL, INTERNAL, or COMPANY use subject to the restriction not to sell, resell, or otherwise distribute the hard copies; and b) place an electronic copy of this use guide on a network if server-provided access to the electronic copy is limited to PERSONAL, INTERNAL users of the Hewlett-Packard printer associated with this use guide. The information contained in this document is subject to change without notice. [. . . ] This change will not take effect until the printer reinitializes. WAIT FOR PRINTER TO REINITIALIZE ENWW Chapter 4: Problem Solving 87 Printer Messages (Continued) Message Explanation or Recommended Action A printer error has occurred that can be cleared by pressing [Go] in the printer's control panel. XX. YY PRINTER ERROR PRESS GO TO CONTINUE 13. x PAPER JAM [LOCATION] Remove jammed paper from the specified location (page 76). Open and close the top cover to clear the message. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider. (See the telephone support flyer included with the printer. ) The printer received more data than can fit in its available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics. Press [Go] to print the transferred data (some data might be lost), then simplify the print job or install additional memory (page C-1). The data (dense text, rules, raster or vector graphics) sent to the printer was too complex. Press [Go] to print the transferred data. (Some data might be lost. ) To print the job without losing data, from the Configuration Menu in the printer control panel, set PAGE PROTECT=ON, print the job, and then return PAGE PROTECT=AUTO. (For more information, see page B-13. ) Do not leave PAGE PROTECT=ON; it might degrade performance. If this message appears often, simplify the print job. Too much data was sent to the EIO card in the specified slot (x). An improper communications protocol may be in use. (Data will be lost. ) Check the host configuration. If this message persists, contact an HP-authorized service or support provider. (See the telephone support flyer included with the printer. ) Too much data was sent to the parallel port. Check for a loose cable connection and be sure to use a high-quality cable (page 8). (Some non-HP parallel cables might be missing pin connections, or might otherwise not conform to the IEEE-1284 specification. ) This error can occur if the driver you are using is not IEEE-1284 compliant. For best results, use an HP driver that came with the printer (page 20). (Data will be lost. ) If this message persists, contact an HP-authorized service or support provider. (See the telephone support flyer included with the printer. ) 20 INSUFFICIENT MEMORY alternates with PRESS GO TO CONTINUE 21 PAGE TOO COMPLEX alternates with PRESS GO TO CONTINUE 22 EIO x BUFFER OVERFLOW alternates with PRESS GO TO CONTINUE 22 PARALLEL I/O BUFFER OVERFLOW alternates with PRESS GO TO CONTINUE 88 Chapter 4: Problem Solving ENWW Printer Messages (Continued) Message Explanation or Recommended Action The connection has been broken between the printer and the EIO card in the specified slot. [. . . ] A circuit board that holds extra memory chips for the printer. The ability to execute a function graphically without typing a command. For example, in the Windows 95 Explorer, you can copy or move a file by "dragging" it from one folder and "dropping" it into another. An optional accessory used for automatically printing on both sides of a sheet of paper. [. . . ]