User manual HP LASERJET M2727 MFP

[. . . ] HP LaserJet M2727 MFP Series User Guide HP LaserJet M2727 mfp User Guide Copyright and License © 2007 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Edition 1, 12/2007 Part number: CB532-90949 The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] If all redial attempts fail, the product updates the fax activity log by adding the error, and then it proceeds to the next number in the group. ENWW Use fax 121 Redial manually 1. Load the document into the automatic document feeder (ADF) input tray or onto the flatbed scanner. If the pages that you want to send are in the ADF, then faxing begins automatically. If the product ADF sensor detects that no document is loaded into the ADF input tray, Send from glass?1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed scanner, press 1 to select Yes, and then press OK. After you press OK, Load page: X Press OK appears on the control-panel display. If you have already placed the document on the flatbed scanner, press OK (or place the document on the flatbed scanner and then press OK). 1=Yes 2=No appears on the control-panel display. If you have more pages to scan, press 1 to select Yes, and then repeat step 5 for each page of the fax job. -orIf you are finished, press 2 to select No. The product sends the fax to the number that it redialed. If the number is busy or does not answer, the product redials the number based on its redial setting. If all redial attempts fail, the product updates the fax activity log by adding the error. Use speed dials and group-dial entries Send a fax by using a speed dial 1. Load the document into the automatic document feeder (ADF) input tray or on the flatbed scanner. Press the one-touch key for the speed dial. -orPress Phone Book, use the alphanumeric buttons to specify the speed-dial entry, and then press OK. Load the document into the automatic document feeder (ADF) input tray or on the flatbed scanner. If the pages that you want to send are in the ADF, then faxing begins automatically. If the product ADF sensor detects that no document is loaded into the ADF input tray, Send from glass?1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed scanner, press 1 to select Yes, and then press OK. [. . . ] A PBX also connects to the public switched telephone network (PSTN) and may be either manual or dial, depending on the method used by extensions to place incoming or outgoing calls. Normally, the equipment is owned by the customer rather than leased from the telephone company. public switched telephone network (PSTN) The worldwide dial-up telephone network or a portion of that network. Users are assigned unique phone numbers, which allow them to connect to the PSTN through local telephone exchange companies. [. . . ]