User manual HP MINI 210 MAINTENANCE AND SERVICE GUIDE

[. . . ] HP Mini 2102, HP Mini 210, and Compaq Mini 210 Maintenance and Service Guide © Copyright 2009 Hewlett-Packard Development Company, L. P. Intel is a trademark of Intel Corporation in the U. S. Microsoft, Windows, and Windows Vista are U. S. registered trademarks of Microsoft Corporation. [. . . ] Top cover (see Top cover on page 52). Remove the speakers: 1. Turn the top cover upside down, with the front toward you. Release the TouchPad cable (1) from the top cover. (The TouchPad cable is attached to the top cover with double-sided adhesive). Release the speaker cable from the clips (2) built into the TouchPad bracket. Remove the two Phillips PM2. 0×4. 0 screws (3) that secure the speakers to the top cover. Remove the speakers (4). Reverse this procedure to install the speakers. Component replacement procedures 55 TouchPad Description For use only with a black top cover For use only with a blue top cover For use only with a red top cover For use only with a silver top cover Spare part number 589677-001 589685-001 589684-001 589683-001 Before removing the TouchPad, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 38). Service cover (see Service cover on page 40). Speakers (see Speakers on page 55). Remove the TouchPad: 1. Turn the top cover upside down, with the front toward you. Release the TouchPad cable (1) from the top cover. (The TouchPad cable is attached to the top cover with double-sided adhesive). Remove the two Phillips PM2. 0×4. 0 screws (2) that secure the TouchPad bracket to the top cover. Release the TouchPad (4) by lifting the front edge until it rests at an angle. 56 Chapter 4 Removal and replacement procedures 6. Remove the TouchPad (5) by sliding it forward. Reverse this procedure to install the TouchPad. Component replacement procedures 57 Display assembly Description Spare part number 10. 1-in display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers and cables, and webcam/microphone module and cable): For use only with HP Mini 2102 and 210 computer models: HD, AntiGlare, flush glass display assembly in black HD, AntiGlare, flush glass display assembly in blue HD, AntiGlare, flush glass display assembly in red HD, AntiGlare, flush glass display assembly in silver HD, AntiGlare, standard display assembly in black WSVGA, AntiGlare, flush glass display assembly in black WSVGA, AntiGlare, flush glass display assembly in blue WSVGA, AntiGlare, flush glass display assembly in red WSVGA, AntiGlare, flush glass display assembly in silver WSVGA, AntiGlare, standard display assembly in black WSVGA, AntiGlare, standard display assembly in silver 589648-001 589646-001 589644-001 589642-001 589650-001 589647-001 589645-001 589643-001 589641-001 589649-001 589651-001 589640-001 10. 1-in, WSVGA, AntiGlare, standard display assembly in black for use only with Compaq Mini 210 computer models Before removing the display assembly, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 38). [. . . ] For disposal or recycling information, contact your local authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www. eiai. org. This section provides disassembly instructions for the display assembly. The display assembly must be disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2). NOTE: The procedures provided in this chapter are general disassembly instructions. Specific details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model to another. 88 Chapter 9 Recycling Perform the following steps: 1. [. . . ]