User manual HP PHOTOSMART 435XI

[. . . ] For product support, including firmware, software, and driver updates, visit www. Zoom lever (Digital and Optical)--Accesses / Zoom while in Picture Capture or Video Record; accesses Thumbnails and Magnify while in Playback and images. Back button--Returns you to a previous menu or view. Camera front, side, and bottom NOTE: If using rechargeable NiMH batteries, fully charge the batteries before using them the first time. [. . . ] Make sure the memory card snaps into place. Close the Battery/Memory Card door and turn on the camera. NOTE: When you turn on your camera with a memory card installed, the camera indicates the number of images you can store on the memory card at the current Image Quality setting. This camera supports storing a maximum of 2000 images on a memory card. Always format new memory cards before first use. Formatting removes all images from the memory card, so make sure to transfer existing images before formatting. Use to select Format Card from the Delete menu, then press . Use to select Yes, then press to format the card. Once you install a memory card, all new images and video clips are stored on the card, rather than in internal memory. To use internal memory and view images stored there, turn off the camera then remove the memory card. The HP Photosmart Software provides features for transferring images and video clips to your computer, as well as features for modifying stored images (remove red eyes, rotate, crop, resize, and more). Use this procedure to transfer images and video clips to your computer. NOTE: Transferring a large number of highresolution images from a memory card to your computer may take up to two hours. When transferring a large number of images, be sure your camera batteries are fully charged or use an optional HP Photosmart dock or memory card reader. Connect the camera and computer using the USB cable that came with your camera. When the Image Display indicates that the camera is connected to the computer, follow the instructions on the computer screen to transfer the images. If you have installed the HP Photosmart Software and need more information, see the Help feature in the HP Photosmart Software. You can connect the camera to any PictBridgecertified printer to print images. Check that the printer is turned on, there is paper in the printer, and there are no printer error messages. Turn off the camera, connect the camera and printer using the USB cable that came with your camera, then turn on the camera. When the camera is connected to the printer, the Image Display shows an image. Use to select the image you want to print. [. . . ] To access this menu, slide to , then press . You can select from the following options: · To access this menu, press from , , or , then select Camera Setup. You can select from the following options: · To access this menu, press from , , or , then select Camera Help. You can select from the following options: · Extending battery life To conserve battery power, the Image Display turns off after a period of inactivity. [. . . ]