User manual HP PHOTOSMART C200X

[. . . ] HP shall not be liable for technical or editorial errors or omissions contained herein. registered trademark of Microsoft Corporation. SD Logo is a trademark of its proprietor. Important recycling information for our customers in the European Union: To preserve the environment, this product must be recycled after its useful life as required by law. [. . . ] In the HP Instant Share Setup program, click Start, then simply follow the directions on the screen to set up destinations on the computer and save them to your camera. · Macintosh: Connecting the camera to the computer activates the HP Instant Share Setup Assistant. Click Continue, then simply follow the directions on the screen to set up destinations on the computer and save them to your camera. Using HP Instant Share 75 Sending Images to Destinations You can send one or more still images to any number of HP Instant Share destinations. Turn on the camera, and then press the HP Instant Share/ / button to display the HP Instant Share Print Menu . Use the buttons to highlight the first destination to which you want to send one or more images. Use the buttons to scroll to a still image that you want to send to the selected destination. Press the button and a appears over that destination in the HP Instant Share Menu. To deselect the destination, press button again. Select any other destinations for the current image by using the buttons to highlight a destination and then press the button to select it. Scroll to other images by using the buttons, and select destinations for those images in the same manner. When you are finished selecting destinations, exit the HP Instant Share Menu by pressing the Live View button. Image Capture or iPhoto then transfers the images and video clips to your computer. When the download is complete, you can disconnect the camera from the computer. 80 HP Photosmart M415 User's Manual Printing Images Directly from the Camera You can connect the camera directly to any PictBridge-certified printer to print images. To determine if your printer is PictBridge-certified, look for the PictBridge logo on your printer. There should be no blinking lights on the printer or error messages displayed about the printer. Make sure the camera's USB Configuration setting is set to Digital Camera (see USB Configuration on page 90). Using the USB cable that came with your camera, connect the larger, flat end of the USB cable to the corresponding connector on the PictBridgecertified printer. TIP: The PictBridge connector is usually located on the front of the printer. Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera. Transferring and Printing Images 81 4. When the camera is connected to the printer, a Print Setup menu displays on the camera. If you already selected images to print using the camera HP Instant Share Menu, the number of images selected is shown. There is a print preview in the lower right-hand corner of the Print Setup screen showing the page layout that will be used for printing images. [. . . ] NOTE: You should purchase lens-cleaning tissue that has not been chemically treated. Some chemically treated lens tissue can cause scratching of the lens and Image Display. 160 HP Photosmart M415 User's Manual Cleaning the Camera Lens Do the following to remove any lubricant that has seeped from the lens wink mechanism onto the camera lens, as well as fingerprints, dust, and so forth that have accumulated on the lens. Turn the camera on to open the lens wink mechanism and to extend the lens. Wrap the lens cleaning paper around the end of the cotton swab. [. . . ]