User manual HP PHOTOSMART M-SERIES DOCK

[. . . ] 2 Insert the rechargeable Nickel Metal Hydride (NiMH) batteries that came in the box with your dock into your camera. The dock will recharge these batteries whenever the camera is in the dock (regardless of whether the camera is on or off). As long as the camera is in the dock, the batteries will be recharged periodically to compensate for self-discharge. NOTE The first time that you use the rechargeable batteries, be sure that you fully charge them in the camera before using the camera. [. . . ] (See your camera User's Manual. ) 10 HP Photosmart M-series dock User's Manual 2 Press the Save/Print button on the dock. The HP Image Transfer software will launch on your computer. If you have set the software to automatically transfer the images from the camera, the images will automatically transfer to the computer. Otherwise, in the Transfer Images from Camera/Card screen, click Start Transfer. The images are transferred to the computer, and then if there are any still images that were previously selected for HP Instant Share destinations, those actions are started. 3 When the Image Action Summary screen appears on the computer, your images have been saved and shared. You can leave the camera in the dock to recharge the camera batteries (if the batteries are rechargeable). Printing Images Using the Dock 1 Confirm the following: · The dock insert is attached to the top of the dock. (See step 1 on page 6. ) · The HP AC power adapter is plugged into the dock, and the power cord for the power adapter is plugged into an electrical outlet. (See step 4 on page 7. ) · The USB cable is connected between the dock and your printer. (See step 4 on page 7. ) · The camera is inserted into the dock. (See step 5 on page 8. ) · The printer is turned on, and paper is loaded in the printer. Refer to your printer user's manual for printer setup information. · If you are using a PictBridge printer, the camera's USB Configuration is set to Digital Camera in the Setup menu. (See your camera User's Manual. ) 11 2 Press the Save/Print button on the dock to start the print dialog. The Print Setup menu displays on the camera. If you already selected images to print in the camera, the number of images selected will be shown in the Print Setup menu. Otherwise, Images: ALL will be displayed. 3 If all the settings in the Print Setup menu look correct, press the Menu/OK button on the camera to begin printing. Or you can change settings in the Print Setup menu using the arrow keys on the camera, then follow the instructions on the screen to begin printing. NOTE There is a print preview in the lower right-hand corner of the Print Setup screen showing the page layout that will be used for printing images. This print preview updates as you change the settings for the Print Size and Paper Size. For PictBridge printers only: If default is displayed for the Print Size or Paper Size, then no print preview is shown. [. . . ] Remove the batteries from the camera and charge them in an external battery charger, then try them in the camera again. If this does not work, it is likely that one or more of the batteries are bad. Purchase new NiMH batteries and try again. 15 Problem The camera batteries will not charge, and the power light on the dock is off. Possible cause The camera is not securely in the dock. The dock does not have electrical power. Solution Make sure the dock insert is placed securely on the dock. [. . . ]