User manual HP PSC 1310 ALL-IN-ONE

[. . . ] Portions Copyright © 1989-2003 Palomar Software Inc. The HP PSC 2400 Series includes printer driver technology licensed from Palomar Software, Inc. www. palomar. com Copyright © 1999-2003 Apple Computer, Inc. Apple, the Apple logo, Mac, Mac logo, Macintosh, and Mac OS are trademarks of Apple Computer, Inc. , registered in the U. S. [. . . ] This selects Basic Fax Setup and then selects Date and Time. Enter the month, day, and year (last two digits only) by pressing the appropriate number on the keypad. The underline cursor presented initially beneath the first digit advances automatically to each digit each time you press a button. The time prompt automatically appears after you enter the last digit of the date. The AM/PM prompt automatically appears after the last digit of the time is entered if your time is displayed in the 12-hour format. If prompted, press 1 for AM or 2 for PM. The new date and time settings appear on the front panel. 4 5 set the paper size You can select the paper size for received faxes. The paper size selected should match what is loaded in your input tray. Faxes can be printed on letter, A4, or legal paper only. Note: If an incorrect paper size is loaded in the input tray when a fax is received, the fax will not print. Load letter, A4, or legal paper, and then press OK to print the fax. Press OK. reprint the faxes in memory Reprint Faxes in Memory enables you to reprint a fax stored in memory. Any time the HP PSC begins printing a fax you do not need, press Cancel to stop it from printing. The HP PSC begins printing the next fax in memory. You will need to press Cancel for each stored fax in order to stop it from printing. Note: All faxes stored in memory will be lost if you turn off the power to your HP PSC. 70 hp psc 2400 series use the fax features In order for faxes to be stored in memory, Backup Fax Reception must be enabled. For information, see set backup fax reception on page 70. This selects Tools and then selects Reprint Faxes in Memory. fax stop faxing ! To stop a fax you are sending or receiving, press Cancel. reference guide 71 chapter 6 fax 72 hp psc 2400 series 7 print from your computer Most print settings are automatically handled by the software application you are printing from or by HP ColorSmart technology. You need to change the settings manually only when you change print quality, print on specific types of paper or film, or use special features. Note: If you have a photo memory card, you can select and print photos directly from it using the HP PSC. For information, see use a photo memory card on page 21. [. . . ] Note that some ring patterns cannot be recognized by the HP PSC, such as those with alternating short and long ringing patterns. If you are having problems with a ring pattern of this type, ask your phone company to assign a non-alternating ring pattern. If you are not using a distinctive ring service, check to make sure that the Answer Ring Pattern feature on your HP PSC is set to All Rings. For information, see change the answer ring pattern (distinctive ringing) on page 68. troubleshooting · I cannot receive faxes, but I can send faxes (continued) · · · reference guide 147 chapter 15 troubleshooting problem possible cause and solution If your HP PSC shares the same phone line with other types of phone equipment--such as an answering machine or a PC modem--the fax signal level might be reduced, causing fax reception problems. [. . . ]