User manual HP PSC 1315

[. . . ] Warning This equipment will be inoperable when main power fails. Governmental stamps: Postage stamps Food stamps Adobe and the Acrobat logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Windows®, Windows NT®, Windows Me®, Windows XP®, and Windows 2000® are U. S. registered trademarks of Microsoft Corporation. Intel® and Pentium® are registered trademarks of Intel Corporation. [. . . ] Make changes to the print settings, and click OK. Click Print or OK in the Print dialog box to print the job. 62 HP PSC 1600 All-in-One series Macintosh users Use the Page Setup and Print dialog boxes to change the settings for your print job. Which dialog box you use depends on which setting you want to change. To change the paper size, orientation, or scaling percentage 1. Select the HP All-in-One in the Chooser (OS 9), Print Center (OS 10. 2 or earlier), or Printer Setup Utility (OS 10. 3 or later) before you begin printing. From the File menu in your software application, choose Page Setup. Make changes to the paper size, orientation, and scaling percentage settings, and click OK. Select the HP All-in-One in the Chooser (OS 9), Print Center (OS 10. 2 or earlier), or Printer Setup Utility (OS 10. 3 or later) before you begin printing. From the File menu in your software application, choose Print. Make changes to the print settings, and click Print to print the job. Print from your computer Stop a print job Although you can stop a print job from either the HP All-in-One or the computer, we recommend you stop it from the HP All-in-One for best results. To stop a print job from the HP All-in-One Press Cancel on the control panel. Look for the Print Cancelled message on the control panel display. For more information on transferring photos from a memory card, see Transfer photos to your computer. For more information on using the HP Image Zone software to share your photos, see Send images using your computer. Send a scanned image You can share a scanned image by pressing Scan To on the control panel. To use Scan To, place an image face down on the glass, select a destination to which you want to send the image, and start the scan. Note For more information on scanning an image, see Use the scan features. To send a scanned image from your HP All-in-One 1. Load your original face down on the right front corner of the glass. Press Scan To on the control panel of your HP All-in-One. The Scan To menu appears on the control panel display. Use the and arrows to highlight HP Instant Share. Press OK or Start Scan to select the destination. The image is scanned and uploaded to your computer. For Windows users, the HP Image Zone software opens on your computer. [. . . ] This section provides information on the regulatory model identification number for your HP All-inOne; an FCC statement; and separate notices to users in Australia, Japan, and Korea. Regulatory model identification number For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SDGOB-0401-01. This regulatory number should not be confused with the marketing name (HP PSC 1600 All-in-One series) or product number. FCC statement The United States Federal Communications Commission (in 47 CFR 15. 105) has specified that the following notice be brought to the attention of users of this product. Declaration of Conformity: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ]