User manual HP PSC 2170 ALL-IN-ONE PSC 2170 SERIES ALL-IN-ONE - REFERENCE GUIDE

[. . . ] hp psc 2170 series all-in-one reference guide © Copyright Hewlett-Packard Company 2003 All rights are reserved. No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. This product incorporates Adobe's PDF technology, which contains an implementation of LZW licensed under U. S. Adobe and the Acrobat logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Hewlett-Packard assumes no responsibility for any errors that may appear in this document, nor does it make expressed or implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. [. . . ] You can turn off Text enhancement by selecting Photo or None if the following occur: · · · · 1 2 3 4 Stray dots of color surround some text on your copies. Large, black typefaces look splotchy (not smooth). Thin, colored objects or lines contain black sections. Horizontal grainy or white bands appear in light- to medium-gray areas. Press Options until Enhancements appears. Press until the desired enhancement (Text, Photo, Mixed, or None) appears. Press Start Black or Start Color. change settings for all copy tasks Save the copy settings you use most often by setting them as the default. 1 2 3 reference guide Make any desired changes to the copy Options. Press Options until Set New Defaults appears. Press until Yes appears. 27 chapter 5 4 Press Enter to set the option as a default. Your settings are saved as the default settings. perform special copy jobs In addition to supporting standard copying, your HP PSC can also do the following: · · · · · copy a photo fit a copy to the page print several copies on one page make a poster prepare a color t-shirt transfer copy a photo When copying a photo, you should select options for the correct paper type and photo enhancement. You may also want to use the photo print cartridge for superior print quality. See work with print cartridges on page 38 for more information. If you are using photo paper, load it in the paper tray. Press until the desired paper option appears. The default paper type is Automatic, which means the HP PSC will automatically detect and determine the paper type. You can choose the specific paper type by pressing until the desired paper type appears. Press Options until Enhancements appears. Tip: To enlarge a photo automatically to a full page, use the Fit to Page feature. 6 7 8 fit a copy to the page Use Fit to Page when you want to automatically enlarge or reduce your original to fit the paper size you have loaded. You can enlarge a small photo to fit a fullsize page, as shown below. Using Fit to Page may also prevent unwanted cropping of text or images around the margins. Tip: Make sure that the glass is clean and the original has been placed in the bottom-right corner of the glass. 28 hp psc 2170 series use the copy features Original Fit to Page 1 2 3 4 5 Load the original on the glass. [. . . ] However, if Product failure or damage is attributable to the use of a non-HP or refilled print cartridge, HP shall charge its standard labor and materials charges to service the Product for the failure or damage. If HP receives, during the applicable warranty period, notice of a defect in any Product, HP shall either repair or replace the defective Product, at HP's option. Where labor charges are not covered by HP's limited warranty, repairs shall be at HP's standard charges for labor. If HP is unable to repair or replace, as applicable, a defective Product which is covered by HP's warranty, HP shall, within a reasonable time after being notified of the defect, refund the purchase price for the Product. [. . . ]