User manual HP PSC 2210 ALL-IN-ONE

[. . . ] hp psc 2200 series all-in-one reference guide © Copyright Hewlett-Packard Company 2002 All rights are reserved. No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. This product incorporates Adobe's PDF technology, which contains an implementation of LZW licensed under U. S. Adobe and the Acrobat logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. [. . . ] ­ Every Fax, which confirms every time a fax is sent or received. ­ Send Only, which prints every time a fax is sent. ­ Off, which does not print fax reports. After the option that you want appears, press Enter. Press 1. 4 generate manual reports 1 2 40 use the fax features hp psc 2200 series 3 Press to scroll through the following report types. ­ 1:Last Transaction, which indicates the status of the last fax sent. ­ 2:Fax Log, which lists approximately the last 40 faxes sent and received. ­ 3:Speed Dial List, which lists your individual numbers. ­ 4:Menu Settings, which lists in outline form the entire menu system and indicates the current and default settings. ­ 5:Self-Test Report, which prints a Self-Test Report. ­ 6:Automatic Reports Setup, which is the automatic reports setting described in generate automated reports on page 40. Select the report you want, then press Enter. 4 control resolution and contrast You can change the resolution and contrast of documents that you are sending. Your changes remain in effect until you change them again; after two minutes of inactivity, settings revert to the default values. The copy settings do not affect faxing, and the fax resolution settings do not affect copying. change resolution Resolution affects the transmission speed and quality of faxed documents. 1 2 Press Fax, if not already lit. ­ Press Enter to select Fax Mode, then enter the fax number. ­ Or, press until Speed Dials appears, press Enter, then select a speed dial. Press to scroll through the available options until the one you want appears. Your HP PSC only faxes at the highest resolution supported by the receiving fax. If you choose Photo, be aware that the faxing process takes longer to complete. When faxing photographs, we recommend that you choose Photo. Press Enter to select the desired option. 3 4 5 change contrast Change this setting if you want to send a black and white fax to be darker or lighter than the original. control resolution and contrast 41 hp psc 2200 series 1 2 Press Fax, if not already lit. ­ Press Enter to select Fax Mode, then enter the fax number. [. . . ] For any hardware Product, the use of a non-HP ink cartridge or a refilled ink cartridge does not affect either the warranty to the Customer or any HP support contract with the Customer. However, if Product failure or damage is attributable to the use of a non-HP or refilled ink cartridge, HP shall charge its standard labor and materials charges to service the Product for the failure or damage. If HP receives, during the applicable warranty period, notice of a defect in any Product, HP shall either repair or replace the defective Product, at HP's option. Where labor charges are not covered by HP's limited warranty, repairs shall be at HP's standard charges for labor. [. . . ]