User manual HP PSC 500XI Operations Guide

[. . . ] No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Note: Regulatory information can be found in Chapter 6 of the HP PSC 500 Customer Care Guide. The information contained in this document is subject to change without notice and should not be construed as a commitment by the Hewlett-Packard Company. Hewlett-Packard assumes no responsibility for any errors that may appear in this document, nor does it make expressed or implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. [. . . ] The settings you change here remain in effect while you are using the current program. To make your changes permanent, make them in the Printers folder. E When you are sure that the settings in the Print dialog box are correct, go to your program's File menu and select Print or OK to start printing. To avoid paper jams, remove papers from the OUT tray frequently. OUT tray capacity is affected by the type of paper and the amount of ink you are using. For more information about tray capacities, see Chapter 6, "Technical Information, " in the HP PSC 500 Customer Care Guide. To stop a print job from the HP PSC 500, press the Cancel button on the front panel. HP recommends that you stop a print job using this method. To stop a print job from the Printers folder, do the following: 1 On the Windows taskbar, click Start, point to Settings, then select Printers. From the list, select the document you want to cancel. Most programs that were designed for Windows 95/98 use the Windows print spooler. The above procedure will work to stop printing in these programs. If the procedure does not work, your program may not use the spooler (for example, PowerPoint in Microsoft Office 95 and 97). If this happens, follow the instructions for canceling "Background Printing" in the online Help for your program. Scanning lets you place pictures in your software programs to use in projects. With the HP PSC 500, you can scan a picture to create: Wallet-size prints Photo enlargements Stickers Posters Banners T-shirt transfers Reports Flyers Business cards Presentations Screensavers Greeting cards (with certain programs) Attach a scanned picture to an e-mail. Store copies of photos to edit later or to keep on your hard drive. You can place your scanned pictures in other programs to create: The scanner light remains on for approximately 12 hours after you turn on the HP PSC 500 for use. this keeps the bulb warm for optimal performance. After 12 hours, the HP PSC 500 turns off the scanner bulb to save energy and displays a "Power Save On" message. Photos Text (forms, letters, receipts) Graphics (children's artwork, logos, drawings) Small objects (coins, flowers, jewelry) Make sure the glass is clean before placing your original. Place your original face down on the glass with the top edge along the border. [. . . ] You can use Mirror to copy favorite photos or images onto HP Iron-On T-Shirt Transfers, and then iron the transfer sheets to make custom T-shirts, banners, and flags. When you use the paper type button to select Iron On, the HP PSC 500 automatically selects Mirror as the Reduce/Enlarge setting. However, you can press the Reduce/ Enlarge button to select another choice. Divides your original into sections, then enlarges the sections. [. . . ]