User manual HP PSC 750 ALL-IN-ONE

[. . . ] No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. WARNING To prevent fire or shock hazard, do not expose this product to rain or any type of moisture. Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. wARNING: Potential Shock Hazard 1 Read and understand all instructions in the Setup Poster. [. . . ] You can access the HP Workplace in the following ways: · The left pane allows you to navigate through the computer's hard drives. You can use the HP Workplace to add annotations, such as rubber stamps and notes, to scans that you have already saved on your hard drive. The HP Workplace allows you to set up links that associate a program with a particular icon. The Preferences dialog box appears, with the General tab visible. Select the type of program that the link you are creating will invoke, and then click Next. The Create Link dialog box displays a choice of specific programs associated with the category you have chosen. For detailed instructions on invoking each of these programs, see the appropriate section in the Onscreen Guide. After you create a link, the associated icon appears on the bottom of the HP Workplace. You can then open a file in the associated program by dragging and dropping files onto the icon. 1 2 In the file-view pane of the workplace, locate the files that you want to send to the program associated with a particular link. 127( Multi-page files are exported into multiple files of the selected type before being passed to the link. Press or until the applicable program appears on the front-panel display, and then press Start Scan. To do this from your computer 1 Load your original. Place your cursor in the HP Scan Window, and then click and drag to highlight the portion of the image to be sent to the selected destination. Using your HP PSC, you can: · Produce high-quality color and black-and-white copies using a variety of paper types and sizes, including iron-on transfers. Reduce or enlarge the size of the copies you make from 25% to 400% of the copy's original size. ) Make the copy lighter or darker, adjust the color intensity, select the number of copies, and specify the quality of the copies you make. Use creative copying features to enlarge a vacation photo (or anything else) for display on a wall as a poster, make wallet-size photos to give to family members, make high-quality copies of photos using special photo paper, or copy a report onto transparency film for use in a presentation to a client. You can make copies using the front panel of your unit or using your computer. Many copy features are available using either method. However, while you may find that the software offers easier access to special copy features, not all functions are available. All copy settings selected on the front panel are reset two minutes after the unit completes the copy job unless you save the settings as the default settings. [. . . ] 2 Reset your unit: a Turn off the unit using the On button located on the unit's front panel. B Unplug the power adapter connector from the back of the unit. C Plug the power adapter connector back into the unit. 4 If you are still experiencing problems and need to speak with an HP Customer Support Representative: · Have your serial number and service ID ready. [. . . ]