User manual HP SCANJET 7450C

[. . . ] The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with respect to this information. hEWLETT-PACKARD SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information. [. . . ] Or, you can click Load Settings and choose settings you have preset. You can scan slides or negatives using the XPA. You should NOT use the XPA to scan full-size (A4 or Letter) presentation slides and transparencies. To scan these full-size items, place them on the scanner glass, place a white piece of paper on top, and scan as you normally would using the Scanner Glass command on the Scan menu. Align the XPA to fit in the corner cutouts on the template. Before making any changes, see "Making optional adjustments for transparent items" on page 72. When finished using the XPA, on the Scan menu, click Scanner Glass. If you are not using all of the slots in the template, cover the empty slots with the knock outs from the template to ensure best image quality. Cover any slots you are not using with the knock outs from the template to ensure best image quality. The graphic on the negatives template should be facing up and closest to the front (non-hinged) portion of the lid. Before making changes, see "Making optional adjustments for transparent items" on page 72. When finished using the XPA, on the Scan menu, click Scanner Glass. Align the XPA to fit in the corner cutouts on the template. Transparencies are like 35 mm slides, only larger. When you scan them, you will use only the larger template. 4 5 Cover any gaps around the edges of the transparency. Align the XPA to fit in the corner cutouts on the template. Before making changes, see "Making optional adjustments for transparent items" on page 72. When finished using the XPA, on the Scan menu, click Scanner Glass. You can make optional adjustments to transparent items scanned using the XPA. Before deciding to make adjustments, create a selection area around one slide or negative so the software exposes it correctly. see "Cropping or selecting an area for final scan" on page 32. [. . . ] If you are using a program that supports TWAIN, you can start the HP PrecisionScan Pro software directly from that program. The horizontal dimension of your scan as it is sent to its destination. The ability to enlarge, or magnify, the image in the Preview area so that finer adjustments can be made to the image. This action does not enlarge the picture that is saved, printed, copied to the Clipboard, or dragged into another program. [. . . ]