User manual HP SCANJET 8390 DOCUMENT FLATBED SCANNER SETUP AND SUPPORT GUIDE

[. . . ] Microsoft and Windows are registered trademarks of Microsoft Corporation. All other product names mentioned herein may be trademarks of their respective companies. The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with respect to this information. HEWLETTPACKARD SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. [. . . ] For more information, see change button settings. For Macintosh see HP Precisionscan Pro Help. Macintosh OS 9: Choose Apple Help Center from the Finder Help menu. Macintosh OS X: Choose Mac Help from the Finder Help menu. Then click the question mark on the bottom-left corner of the Mac Help window and choose HP Precisionscan Pro Help. 1 2 3 Close the HP Scanning software and the HP Copying software if they are open on your computer. Place the original face down on the scanner glass and close the lid. The scanner scans the item using default settings optimized for e-mail. 6 4 Follow the instructions on your computer screen. If your e-mail program is supported, a screen appears where you can address and compose a message. You can also e-mail a scan from the software. For more information, see the HP Photo & Imaging software Help. For Macintosh see HP Precisionscan Pro Help. Macintosh OS 9: Choose Apple Help Center from the Finder Help menu. Macintosh OS X: Choose Mac Help from the Finder Help menu. On a Windows computer: 1 2 3 Open the Director, and on the Settings menu, click Button Settings. On the Scan Button tab, in the Destination box, specify the destination to which you want to send your scan. Change other settings as required, and then click OK. If you want your scans to go directly to the selected destination, on the Scan Button tab, make sure the Show Preview check box is cleared. how to use the scanner to change settings for the COPY button If your scanner has a COPY button, the software will remember the settings you chose the last time you used the HP Copying software. · Open the Director, click Make Copies, and then change the settings. how to use the scanner 10 4 scanner is not working · installation problems - hp scanjet 2300c or 3500c series This chapter contains solutions to common installation problems. For solutions to usage problems or maintenance issues, such as cleaning the scanner glass, see "troubleshooting" in the HP Photo & Imaging software Help. · · First, check your computer: ­ Make sure your computer meets the minimum system requirements that are listed on the scanner box. ­ If you do not have enough hard-disk space, remove unnecessary files or install the software on a different disk drive. On a Microsoft® Windows® computer, if you receive a message such as "Destination Directory Is Invalid" or "Program Folder Is Invalid" during installation, do one of the following: ­ Type a valid destination folder name. The destination folder cannot contain the following characters: /, \, :, ?, *, <, >, ", or |. ­ Find a valid folder using the Browse button. Check the cables: ­ Check that the power cable is securely connected between the scanner and a live electrical outlet or surge protector. [. . . ] Click Change (or Add/Remove, depending on your version of Windows). Follow the instructions on the computer screen, and then click Remove. 13  1 2 3 4 5 Unplug the scanner and restart the computer. (If you do not unplug the scanner and restart the computer before you uninstall the software, some files are not removed from your computer during uninstallation. ) Insert the HP Photo & Imaging CD-ROM into your computer's CD-ROM drive. (If the HP Photo & Imaging CD-ROM window does not appear, double-click the icon for the CD-ROM. ) Double-click the Installer, and then follow the instructions on the screen. [. . . ]