User manual HP STORAGEWORKS 6000 VIRTUAL LIBRARY SYSTEM STORAGEWORKS 6000 VIRTUAL LIBRARY SYSTEM NODE INSTALLATION INSTRUCTIONS (DECEMB

[. . . ] HP StorageWorks 6000 Virtual Library System Node Installation Warning: The node weighs 16. 78 kg (37 lb) full. At least two people are required to lift and rack mount the node. Caution: Make sure that the rack and all equipment mounted in the rack has a reliable ground connection. [. . . ] Other racks might also be suitable, but have not been tested with the VLS. 1 Inspect the box contents. You will also need a Phillips screwdriver. 1 Node 2 Node power cord 3 Serial cable 4 1U rack mounting hardware kit and documentation 5 Printed VLS node installation poster 6 Documentation CD and VLS Recovery CD 7 Loopback plugs (up to 3 included) 1 2 3 y 00 60 Librar de l No tua Vir tem ation Sys tall Ins HP orks eW rag Sto 4 1 2 5 4 6 3 1 will lips s. You a Phil tent and con box people the ect d two e kit Insp nee iver. war ter ry CD cord also wdr e er pos g hard scre Nod e pow le on Recove llati 1 Nod cab mountin ion VLS ntat e insta 2 Serial and 3 1U rack ume nod CD 4 and doc VLS ion ted ntat 5 Prin ume 6 Doc 5 7 6 *AF728-96006* AF728-96006 2 Select a rack location that meets the space, airflow, temperature, power, and electrical grounding requirements described in the HP StorageWorks 6000 Virtual Library System User Guide. For adequate airflow within the rack, use appropriate high airflow inserts in rack cabinet doors and observe industry standard practices for adequate spacing between racks or rows of racks. 3 1 2 5 4 3 Front components 1 Diskette drive blank 2 CD drive 3 FrontUSBport 4 Hard drive 0 5 Hard drive 1 4 1 2 3 4 5 6 7 8 9 10 11 12 Rear components 1 Fibre Channel host ports 2 VHDCI connectors 3 Power supply bay 1 4 Power supply bay 0 5 Serial connector 6 Video connector 7 Keyboard connector 8 Mouse connector (not used) 9 iLO management LAN port (service port) 10 10/100/1000 NIC 1 (user network) 11 10/100/1000 NIC 2 (service port) 12 Rear USB connector 5 Installing the node in a rack To install the node into a rack with square, round, or threaded holes, see the instructions that ship with the 1U rack hardware kit. Note: Allow enough rack space above and/or below the node to mount the disk array(s). The disk arrays each require a vertical rack space of 2U (equivalent to 89 mm, or 3. 5 inches). Do not plan to mount more than two disk arrays above or below the node, as doing so will prevent you from extending the node from the rack due to SCSI cable length restrictions. If you are installing the node into a telco rack, order the appropriate option kit at the RackSolutions. com website (http://www. racksolutions. com). 6 Connect Fibre Channel cables from your SAN media server to the node Fibre Channel host ports, starting with Fibre Channel host port 0 and working towards Fibre Channel host port 3. 1 2 3 4 5 Fibre Channel host port Fibre Channel host port Fibre Channel host port Fibre Channel host port 10/100/1000 NIC 1 0 1 2 3 Cabling 1 2 3 4 5 7 Warning: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug telephone or telecommunications connectors into RJ-45 (NIC) connectors. If there are any unused Fibre Channel ports on the node, install a loopback plug on each. Loopback plugs are included in the server accessory box. Note: Unused Fibre Channel ports without loopback plugs cause connection failures and associated failure notifications. 8 Connect a standard Ethernet (CAT-5) cable from your local IP network (LAN) to the 10/100/1000 NIC 1 (RJ-45) connector. Warning: To reduce the risk of electric shock or damage to the equipment: · Do not disable the power cord grounding plug. [. . . ] · The HP StorageWorks 6000 Virtual Library System User Guide · The HP website, http://www. hp. com · Your nearest HP authorized reseller (locations and telephone numbers of these resellers are given on the HP website) · HP technical support telephone numbers: -- In North America, 1-800-633-3600 -- For other regions, telephone numbers are given on the HP website. © Copyright 2005 Hewlett-Packard Development Company, L. P. Second Edition (December 2005) Part Number: AF728-96006 [. . . ]