User manual HP STORAGEWORKS 7400 VIRTUAL ARRAY DISK DRIVE AND POWER SUPPLY LED BEHAVIOR

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HP STORAGEWORKS 7400 VIRTUAL ARRAY. We hope that this HP STORAGEWORKS 7400 VIRTUAL ARRAY user guide will be useful to you.

Lastmanuals help download the user guide HP STORAGEWORKS 7400 VIRTUAL ARRAY.

Mode d'emploi HP STORAGEWORKS 7400 VIRTUAL ARRAY

Download

You may also download the following manuals related to this product:

HP STORAGEWORKS 7400 VIRTUAL ARRAY DISK REPLACEMENT (1060 ko)

HP STORAGEWORKS 7400 VIRTUAL ARRAY POWER SUPPLY REPLACEMENT (1137 ko)

HP STORAGEWORKS 7400 VIRTUAL ARRAY LINUX CONFIGURATION VA 7100/7400 (73 ko)

HP STORAGEWORKS 7400 VIRTUAL ARRAY DISK SYSTEM/CONFIGURATION SPECIFIC INSTRUCTIONS (186 ko)

HP STORAGEWORKS 7400 VIRTUAL ARRAY DISK HARDWARE COMPONENT REPLACEMENT INSTRUCTIONS (1107 ko)

HP STORAGEWORKS 7400 VIRTUAL ARRAY POWER SUPPLY SYSTEM/CONFIGURATION SPECIFIC INSTRUCTIONS (318 ko)

HP STORAGEWORKS 7400 VIRTUAL ARRAY POWER SUPPLY HARDWARE COMPONENT REPLACEMENT INSTRUCTIONS (1236 ko)

HP STORAGEWORKS 7400 VIRTUAL ARRAY STORAGEWORKS VIRTUAL ARRAY FAMILY RACK INSTALLATION GUIDE (THIS MANUAL ALSO COV (2303 ko)

HP STORAGEWORKS 7400 VIRTUAL ARRAY STORAGEWORKS VIRTUAL ARRAYS VA 7000 FAMILY INSTALLATION FLOWCHART (THIS MANUAL (50 ko)

Manual abstract: user guide HP STORAGEWORKS 7400 VIRTUAL ARRAYDISK DRIVE AND POWER SUPPLY LED BEHAVIOR

Detailed instructions for use are in the User's Guide.

 [. . . ] Disk Drive LED Behavior
VA7100 / VA7400
Figure 1: Disk Drive LEDs

B A

A

B

Note After installation,  the controller starts the Auto Format process. During this time,  the green disk activity LED (A in Figure 2) will be flashing.  [. . . ] Host is identifying disk drive. 
*Controlled by the disk drive. **Controlled by the array controller. 

DS2300 / DS2405
Figure 2: Disk Drive LEDs

B A

A

B

Note The green Activity LED (A in Figure 2) should be on while the disk spins up and then turn off. The green Activity LED (A) will blink with I/O activity to the disk. An amber light (B in Figure 2) that is on briefly when a component first comes on is normal. If this light stays on more than a couple of seconds,  a fault has been detected. See Table 2 for a full list of disk LED behaviors. 

If you observe different results,  further Troubleshooting may need to be carried out. (See Chapter 4 of the HP StorageWorks Disk System 2300 User' Guide or HP StorageWorks Disk System 2405 User' Guide s s for troubleshooting procedures. )

Table 2: DS2300 / DS2405 Disk Drive LEDs Status Indications A Disk Activity (Green*)
ON Flashing OFF ON/OFF OFF

B Disk Fault (Amber**)
OFF OFF ON Flashing OFF

Indication

Installed and spinning up. If the LED is still on 3 minutes after power is engaged,  the disk may be faulty. Disk drive self-test in progress or there is input/output activity to the disk. Disk drive fault (Controlled by host software).  [. . . ] Power module under power and operating normally. Host identifying power module. 

*Can be on,  off,  or flashing [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP STORAGEWORKS 7400 VIRTUAL ARRAY

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HP STORAGEWORKS 7400 VIRTUAL ARRAY will begin.