User manual HP W1907V

[. . . ] User's Guide vp15 LCD Monitor vp17 LCD Monitor vp19 LCD Monitor FP1707 LCD Monitor WF1907 LCD Monitor w1707 LCD Monitor w1907 LCD Monitor w2007 LCD Monitor w2207 LCD Monitor w2216 LCD Monitor w2408 LCD Monitor The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP. [. . . ] Enters the selected option. Using the Onscreen Display (OSD) An onscreen display is an image superimposed on a screen picture, commonly used by monitors, televisions, VCRs, and DVD players to display information such as volume, channel, and time. NOTE: You can use My Display OSD software (select models only) or the front-panel control buttons to adjust settings. 1. If the monitor is not already on, press the Power button to turn on the monitor. To access the OSD menu, press the Menu button. To navigate through the Main or Sub-Menu menu, press the + (Plus) button on the monitor's front panel to scroll up, or the ­ (Minus) button to scroll in reverse. Then press the Auto/Select button to select the highlighted function. The menu moves to the top if you scroll down at the bottom of the selections. The menu moves to the bottom if you scroll up at the top of the selections. To adjust the scale of a selected item, press the + or ­ button. If you don't want to save the setting, select Cancel from the Sub-Menu or Exit from the Main Menu. When a NOTE: are savedmenu is displayed, if the buttons are untouched for 30 seconds (factory default), adjustments and settings and the menu closes. User's Guide 4­3 Operating the Monitor OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: Cancel -- to return to the previous menu level. Save and Return -- to save all changes and return to the OSD Main Menu screen. This Save and Return option is active only if you change a menu item. Reset -- to change back to the previous setting. Main Menu Options Switch Video Input (select models only) Brightness Contrast Image Control Auto-Adjustment Horizontal Position Vertical Position Custom Scaling (select models only) Icon Submenu Options Description Switches the video input signal source when the monitor is connected to two active and valid video sources. Switching video input sources may take several seconds. Adjusts the brightness level of the screen. Adjusts the contrast level of the screen. Also enables or disables the ambient light sensor (select models only). Automatically adjusts the screen image (VGA Input only). Adjusts the horizontal position of the picture (VGA Input only). Adjusts the vertical position of the picture (VGA Input only). Selects the method on how displayed information on the monitor will be formatted. [. . . ] Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC rules and regulations. Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]