User manual HUBBELL LIGHTING WG-16

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Do not expose batteries or apparatus with batteryinstalled to excessive heat such as sunshine, fire or the like. In door use only. Date of Manufacture Marking is located on the rear exterior. The following FCC statement applies only to the version of this model manufactured for sale in the USA. [. . . ] Example: [4:3] [Network Update] You can update and improve the functions of the system. For information about update functions, refer to the following website; http://www. sony. net/ 1 Setup 4:3 TV Type Set the screen aspect ratio of your TV. Screen Format DVD Aspect Ratio Cinema Conversion Mode Original Letter Box Auto Press X/x to select [Network Update], then press . The unit connects to the network, and the display asks for confirmation. 2 Press C/c to select [OK], then press . Selected setting The unit starts downloading, then updating the software automatically. When updating finishes, "COMPLETE!" appears for 5 seconds in the front panel display, then the system automatically turns off. 3 Note Press "/1 to turn the system on. The system starts up with the updated software. · Do not disconnect the AC power cord (mains lead) or network cable while downloading or updating software. · Any operations, including opening the disc tray, are not available while updating. · Downloading times may differ depending on the server provider or line status. · When error messages on network connections appear, check the network connections using [Network Diagnostic] of [Internet Settings] in [Network Settings] (page 117). Tip · The "UPDATE */9" counter ("*" indicates update step) in the front panel display also shows progress of the update. · You can check the current software version by selecting [System Information] in [System Settings] (page 116). · The [Setup] settings remain after updating. · The system informs you of newer software version information when [Software Update Notification] is set to [On] (default) (page 116). 108US To update the software using an update disc You can update and improve the functions of the system using an update disc provided by Sony dealer or local authorized Sony service facility. [Video Settings] You can make the video settings according to the type of connecting jacks. x [TV Type] 1 2 Insert the update disc. The display asks for confirmation. Select [OK], and press . You can select the aspect ratio of the connected TV. [16:9]: Select this when connecting to a widescreen TV or a TV with a wide mode function. [Mix]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. [Direct]: Outputs the primary audio only. x [Audio DRC] (BD/DVD VIDEO only) Distortion may occur when you listen to a component connected to the TV jacks. Distortion is not a malfunction and will depend on the component connected. To prevent distortion, reduce the input level on the unit. [Off]: Normal input level. x [Attenuate - SAT/CABLE] You can compress the dynamic range of the sound track. [Audio DRC] is useful for watching movies at low volume late at night. [Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only). Other discs are played back at the "Standard" level. [Standard]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended. [Max]: The system compresses dynamic range fully. x [Fs Limit] Distortion may occur when you listen to a component connected to the SAT/CABLE IN jacks. Distortion is not a malfunction and will depend on the component connected. [. . . ] All six channels in this format are recorded separately for superior channel separation. Furthermore, since all the signals are processed digitally, less signal degradation occurs. 151US Dolby Digital Plus Developed as an extension to Dolby Digital, the audio coding technology supports 7. 1 multichannel surround sound. Dolby Pro Logic II being recorded discretely and processed in digitally. DTS-HD High Resolution Audio Dolby Pro Logic II creates five full-bandwidth output channels from 2 channel sources. This is done using an advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. x Movie mode Developed as an extension to DTS Digital Surround format. It supports a maximum sampling frequency of 96 kHz, and 7. 1 multichannel surround. [. . . ]