User manual HUMAX F1-VA

[. . . ] Digital Satellite Receiver User's Manual Viaccess Embedded Warning! Please do not insert metal or alien substance in hole for Smart Card. In this case, it is possible that life span of STB is damaged. CONTENTS Safety STB Connection Remote Control Unit (RCU) Guide of Functions Guide of Main Menu Parameters Organizing Channels Status Smart Card Installation 1 2 3 4 7 7 9 10 10 12 15 17 Specification Trouble Shooting Guide Safety This STB has been manufactured to satisfy the international safety standards. Please read the following recommended safety precautions carefully. MAINS SUPPLY : OVERLOADING : LIQUIDS : 190 ~ 260V AC 50/60Hz. [. . . ] Your required Smart Card is supported by service provider or distributor. 6 Guide of Main Menu This section introduces the Main Menu structure of STB. Using Menus By pressing the ARROW key on the RCU you can select menus. You can always confirm the option by pressing OK on the RCU. This is a valid in all menus. Parameters Language Setting Use to select the Menu and Audio language. Menu Language You are able to select the language for the menu and OSD( On-Screen Display ). It supports English, French, German, Italian and more. Main Audio Language Some channel providers broadcast with one or more alternative language soundtracks. You can select your preferred Audio language in this submenu. Time Setting Time Adjustment If your time zone is different from that of the service provider, you can adjust to your local time. It changes in steps of 30 minutes intervals. Turn On Time (Automatic switch on time) To set a wake up time, you can enter the 4 digits of hours and minutes using the 0 ~ 9 number keys. After setting, the STB is automatically turned on at the set time. If DISABLE is selected, the STB will not automatically turn on. 7 Turn Off Time (Automatic switch off time) To set a sleep time, you can enter the 4 digits of hours and minutes. After setting, the STB is automatically turned off at the set time. If DISABLE is selected, the STB will not automatically turn off. System Setting This menu is used to configure the Audio/Video output parameters, including setting the type of A/V output on the SCART, RF and RCA connector. The Video output can be set for RGB, Composite video (CVBS) or S-VHS depending on the function of TV when you have connected to the SCART. You can select Stereo or Mono Audio output. If you have a widescreen TV, the aspect ratio setting in screen mode should be adjusted to 16:9 to allow the STB to automatically switch to widescreen format for a widescreen programme. Box display time setting The brightness and display duration of the information box is set here. The duration can be set in the region of 0 to 20 seconds. If you enter 5 seconds, information box is displayed for 5 seconds after a channel change. Selecting duration of 0 seconds, prevents the Info. Box from being displayed when changing channel or pressing i key. UHF Tuning This menu is used to configure the UHF TV output setting. The required UHF channel, the PAL sound mode and channel offset adjustment are set here. [. . . ] In case of need to insert a `Hex' Code. Select the `Hex' position using the LEFT/RIGHT keys. Press OK then appears to Code Input Box. Select the required `Hex' Code by ARROW/OK keys. 13 SMATV Channel Search Use to search for channels when using SMATV equipment. [. . . ]