User manual HUMAX ICORD HD PLUS

[. . . ] HD Digital Recorder User's Manual iCord HD+ The default password is 0000. Notice English Thank you for purchasing a HUMAX product. Please read this user's manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. The information in this user's manual is subject to change without notice. Copyright (Copyright © 2010 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law. Warranty The warranty does not cover parts which may become defective due to misuse of the information contained in this manual. Meaning of Symbols To reduce the risk of electric shock, do not remove cover (or back). [. . . ] Please repeat the search process to search more satellites. · Select Stop and press the OK button to stop the channel search. · Refer to Setting Transponder for details in transponder setting. Menu On/Off Select Confirm Enter 0~9 64 Installation Motor Setting Set the type and location of your motor. Select Motor Setting and press the OK button. Select Motor Type. DiSEqC1. 2: General motor antenna using DiSEqC 1. 2. USALS: Motor antenna using USALS. English 3. Select My Longitude and enter the longitude and direction. Select My Latitude and enter the latitude and direction. Select LNB Frequency and enter the LNB frequency. Note: When Motor Type is set as DiSEqC 1. 2, both My Longitude and My Latitude are inactivated. Edit Satellite Data Select the satellites that the motor antenna is pointing to. Select Edit Satellite Data and press the OK button. Select satellites using the / and OK button. When selecting User Define, enter the Longitude and Direction. Press the BACK button to save and return. Menu On/Off Select Confirm Enter 0~9 65 Installation Position Setting Set your antenna position for the selected satellites. Select Satellite and select the satellite. Select Transponder and select the transponder. Select Motor Driving and select the motor driving option. Continuous ­ Step ­ Time 5. When motor driving a set to Step or Time, select Driving Size and select one from 1~127. Select Go to Stored Position to make the antenna turn toward the position of the selected satellite. Fine-tune the position using the / button until the signal strength and quality reaches the maximum level. Select Store Current Position to save the adjusted position. Select Recalculate to recalculate the positions of all satellites based on the position of current satellite. [. . . ] In such case, this License incorporates the limitation as if written in the body of this License. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. [. . . ]