User manual HUMAX IRHD-5100S

[. . . ] Digitální HD set-top box HD digitálny káblový prijímac Uzivatelská pírucka Návod na pouzitie IRHD-5100S Výchozí nastavené heslo je 0000. Predvolené heslo je 0000. Notice English Thank you for purchasing a HUMAX product. Please read this user's manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. [. . . ] Select satellites using the / and OK button. When selecting User Define, enter the Longitude and Direction. Press the BACK button to save and return. Menu On/Off Select Confirm Enter 0~9 58 Installation Position Setting Set your antenna position for the selected satellites. Select Satellite and select the satellite. Select Transponder and select the transponder. Select Motor Driving and select the motor driving option. Continuous ­ Step ­ Time English 5. When motor driving a set to Step or Time, select Driving Size and select one from 1~127. Select Go to Stored Position to make the antenna turn toward the position of the selected satellite. Fine-tune the position using the / button until the signal strength and quality reaches the maximum level. Select Store Current Position to save the adjusted position. Select Recalculate to recalculate the positions of all satellites based on the position of current satellite. Note: When Motor Type is set as USALS, Motor Driving, Store Current Position and Recalculate are inactivated. Limit Setting Set the operation limit of your motor. Select Limit Position and select East or West. Select Set Limit and set the operation limit to East or West using the / button. Select Reset Position to initialise the position of the motor antenna to the original position (factory default). Menu On/Off Select Confirm Enter 0~9 59 Installation Setting Search Options You can set the options for more specific search. Set the search options. Network Search: Select On to receive the latest channel information. Scrambled Type: All ­ FTA ­ CAS Channel Type: All ­ TV ­ Radio 3. Select OK to save and exit. Factory Default MENU Settings Installation Factory Default 1. You will be prompted to enter the password. If you have forgotten your password, please contact your local distributor. Warning: Please note that once you perform Default Setting, all data such as antenna setting information, channel list, and all user configured data will be deleted. After completing the default setting, the installation wizard will appear automatically in a few seconds. Menu On/Off Select Confirm Enter 0~9 60 System English In System, you can view the information of the system, signal detection, Smartcard and data storage. [. . . ] The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. [. . . ]