User manual HUMAX LGB-32DRCNL

[. . . ] Indicates a hazardous situation which, if not avoided, could result in serious injury. This symbol indicates important instructions accompanying the LCD-TV. Read this manual carefully and make sure you understand the instructions provided. For your safety, check what the result of each action will be. Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. [. . . ] Select a reserved item which you want to edit using the and press the OK button. 5. The next editing procedure is the same as Adding recording reservations. When the reserved start time comes, the following message will be displayed on the screen ; If you select Yes and press OK button, the recording of the reserved programme is started. Note : _ If the reserved start time comes in the standby mode, no sooner have you turn on the LCD-TV than the confirm message will be displayed on the screen. _ If the programme to reserve overlaps with the existing one, adjust the reservation so as not to overlap. _ If you want to stop on recording, press the STOP ( ) button. _ When you are recording the channel which is watching currently, the subtitle is recorded according to subtitle-setting in start of recording. When you are recording the channel which is not watching currently, the subtitle is recorded according to subtitle-setting in Menu (DTV SETUP - Preferences - Local Setting - Subtitle Language/Display). 34. Recording Recording Time Shifted Recording This LCD-TV automatically saves the programme on air in the installed hard disk drive temporarily, so that users can watch programmes as they watch a video tape using functions such as rewind, fast forward, instant replay and pause. 1. On watching TV, press the TSR on the remote control until when Time Shift On message appears, and the time shifted recording will be started. _ If you press the TSR button on watching TV, the current state of time shifted recording will be displayed with a message (Time Shift On or Time Shift Off). If you press it once again, the message will be changed to the other state. _ On the channel during time shifted recording, if you press the OK button, TSR On message is shown. Enter the desired programme title on the screen keyboard using the / / / button. After finishing editing, select Save, and then press the OK button to complete. Delete File You can delete the recorded programme. 1. Select your desired programme in the list using the / button. 2. Select Delete File using the / button, and press the OK button. (Do you want to delete this recorded programme?) 3. Select Yes using the / button, and then press the OK button to delete the file. If you don't delete the file, select No and press the OK button. Copy File to External Device You can copy the recorded programme from/to external device. 1. Select your desired programme in the list using the button. 2. Select Copy file to external device using the / button, and press the OK button. Display the progressing status including copied rate, elapsed time and remaining time. Please wait to copy to external device completely. [. . . ] No picture / No picture from AV terminal. Picture is displayed, But no sound from the Speakers. Check item + Insert the AC power cord plug securely in AC power outlet. + Make sure the remote control is not in the standby mode (The POWER/Standby indicator is Orange colour. ) + Turn on the MAIN POWER button on the bottom of the display. [. . . ]