User manual HUMAX PVR-8000

[. . . ] Contents Safety ------------------------------------------------- GB1 ~ GB2 Warning & Glossary -------------------------------- GB3 Reference -------------------------------------------- GB4 STB Connections ---------------------------------- GB5 ~ GB10 Remote Control Unit ------------------------------- GB11 ~ GB12 Function Guide -------------------------------------- GB13 ~ GB16 Main Menu Guide ----------------------------------- GB17 ~ GB43 Hard Disk Recorder ------------------------------- GB44 ~ GB51 Motorised System ---------------------------------- GB52 ~ GB53 Troubleshooting Guide ---------------------------- GB54 ~ GB55 Specification ----------------------------------------- GB56 ~ GB58 Menu Map -------------------------------------------- GB59 ~ GB60 Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY OVERLOADING LIQUIDS : 90-250V AC 50/60Hz : Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock. : The STB should not be exposed to any liquids (incl. [. . . ] Press the numerical button 3 to select cancel operation directly. Or move the cursor to the Operation window using the buttons, and select Cancel, and then press the OK button. Press numerical button 3 to select Simple EPG operation directly. Or move the cursor to the Operation window, using the button. Select Simple EPG, using the buttons and then press the OK button. It will display a Simple EPG like an Information box. This mode displays in the A/V playback mode. Black vertical line Black/white bar Time range of bar : Indicates the current time. : Display the proceeding state of programme. : This consists of three blocks by 30 minutes per block. GB29 GB 3. Parental Control You can set a parental guidance rating to each programme in this mode. When the Parental Control is selected using the buttons in the Main menu, a display window for entering the PIN code will appear on the center of screen. Enter the PIN code on the display window. (If any problem occurs when entering a PIN code, you cannot switch to the next mode. ) 3. Set the parental guidance rating of highlighted Censorship classification. Press the buttons to select the parental level. The parental level is displayed as age-based numbers: no block, 6, 10, 14, 18 and total block. Enter the PIN code to unlock or lock programmes. To change your PIN code: · Select the highlighted Old PIN code using the buttons and then enter your Old PIN code. · Enter a New PIN code in the highlighted New PIN code using the buttons. · To verify the New PIN code, re-enter a New PIN code in the highlighted Verify Changed PIN code. If the entered PIN code is correct, then all settings are completed. [. . . ] To drive the motor, move to and select the Movement item on Category window, and move the cursor to Item by using the buttons like the case of user. Then select `(E) +1 move' or `(W) +1 move' by using the buttons. If it starts to be driven, move the motor until you find the location at which signal quality is best. When the best location is found, save the location information using the Store command on Operation window. [. . . ]