User manual HUMMINBIRD 1198C SI COMBO

[. . . ] Product Manual Installation and Operations Manual 1158c Combo & 1198c SI Combo Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. [. . . ] Use this view to review the snapshot and recording file details, start recording, and adjust the recording settings. · Activate Screen Snapshot: Select Screen Snapshot from the Accessories Menu Tab, and select On. Also, install an optional-purchase SD card in the control head, and make sure Snapshot and Recording View is set to Visible on the Views Menu Tab. · Scroll and View: Use the UP and DOWN Cursor keys to scroll through the saved Screen Snapshots and Recordings. The active file is highlighted with arrows. Press the RIGHT Cursor key to view the file. · Snapshot and Recording X-PressTM Menu: Press the MENU key once in this view to open the X-PressTM Menu. Use the X-PressTM Menu to Start Recording, Delete Images, or adjust the Recording and Playback settings (see Recording and Playback or Snapshot and Recording X-PressTM Menu). NOTE: The speed of the screen capture or the recording depends on the type of card you use; in general, SD cards capture the screen faster than MMC cards. Snapshot and Recording View 1 4 5 3 6 2 7 5 8 1 2 3 4 Recording icon Snapshot thumbnail Unavailable icon Information box Amount of recording left to play 5 Recording mode icons 6 Amount of recording that has been played 7 Amount of space used for this recording 8 NOTE: For snapshots and recordings, the indicator bar has several states: during recording, the amount of space remaining on the SD card is indicated on the status bar. During playback, the amount of time/memory remaining to play is indicated on the status bar. When a snapshot thumbnail is highlighted, the amount of room remaining on the SD card is indicated. 87 Views Screen Snapshots Screen Snapshots are saved pictures of the view on the screen. The screen snapshot will include the menus, dialog boxes, warnings, and messages that were active when the screen snapshot was taken. Saved Screen Snapshots can be viewed from the Snapshot and Recording View or Chart View. The Screen Snapshot feature is available when an optional-purchase SD card is installed and Screen Snapshot is On (see Accessories Menu Tab: Screen Snapshot). Make a Screen Snapshot: 1. Activate Screen Snapshot and install an SD card. 1 2 3 2. From any view or cursor location you want to capture, press the MARK key. The screen will pause while the image is saved. A waypoint will also be created at the boat or active cursor location. The screen snapshot shares the same file name (. PNG). 1 Waypoint saved at Cursor Location 2 Screen Snapshot Confirmation 3 File Name 1 Delete a Screen Snapshot: 1. From the Snapshot and Recording View, press the UP or DOWN Cursor keys to scroll through the saved files and highlight a snapshot file. Press the Menu key once, and select Delete Image from the X-PressTM Menu. Press the RIGHT Cursor key. 1 From Snapshot and Recording View, select Delete Image from the X-PressTM Menu. NOTE: Navigation is not affected by the Screen Snapshot feature. Also, if Screen Snapshot is enabled, but a GPS receiver is not connected, pressing the MARK key will capture the screen image but an error will display that says a GPS position fix is required to create a waypoint. Views 88 View a saved Screen Snapshot from Snapshot and Recording View: 1 4 2 3 1. [. . . ] Humminbird® products allow for input and display of both speed measurements. Time To Go (TTG) The estimated time required to reach the destination waypoint. TTG is calculated using the SOG and DTG. Track A series of saved points that define the past path of the boat. These Track Points are saved at regular time intervals. [. . . ]