User manual HUMMINBIRD 788CI COMBO

[. . . ] 788c and 788ci Combo Operations Manual 531687-1_C Section Title Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. [. . . ] To avoid canceling navigation, press the LEFT Cursor key. 93 Navigation X-PressTM Menu Cancel MOB Navigation (only when MOB Navigation is activated) Cancel MOB Navigation removes the Man Overboard (MOB) waypoint and exits Man Overboard mode. This menu option will only appear when you are currently navigating in Man Overboard mode. Highlight Cancel MOB Navigation on the Navigation X-PressTM Menu. Press the RIGHT Cursor key to initiate canceling MOB navigation. To cancel MOB navigation, press the RIGHT Cursor key once more. To avoid canceling MOB navigation, press the LEFT Cursor key. Remove Target (only if a Target is Active) Remove Target removes the waypoint target from the display. This menu option will only appear when a target has already been applied to a waypoint. NOTE: See Introduction to Navigation: Add a Waypoint Target or Trolling Grid for more information. To Remove a Target: 1. Highlight Remove Target on the Navigation X-PressTM Menu. Press the RIGHT Cursor key to remove the target. Navigation X-PressTM Menu 94 Remove Grid (only if a Grid is Active) Remove Grid removes the waypoint grid from the display. This menu option will only appear when a grid has already been applied to a waypoint. NOTE: See Introduction to Navigation: Add a Waypoint Target or Trolling Grid for more information. To Remove a Grid: 1. Highlight Remove Grid on the Navigation X-PressTM Menu. Press the RIGHT Cursor key to remove the grid. Sonar Window (Combo View only) Sonar Window sets the size of the Sonar Window in the Combo View. Sonar Window can only be accessed from the Combo View. To Set the Size of the Sonar Window in the Combo View: 1. Highlight Sonar Window on the Navigation X-PressTM Menu. Press the LEFT or RIGHT Cursor keys to adjust the size of the sonar window. (Wide, Medium, Narrow, Default = Medium) 95 Navigation X-PressTM Menu Waypoint [Name] (Most recently-created waypoint) Waypoint [Name] allows you to view the waypoints submenu for the most recently created waypoint. NOTE: You must have pressed the MARK key at least once since you last powered up the Fishing System for this menu option to appear. To view the Waypoint [Name] Submenu: 1. Use the 4-WAY Cursor Control key to move the cursor to a position on the screen, and press the MARK key once to save a waypoint. Highlight Waypoint[Name] on the Navigation X-PressTM Menu. Press the RIGHT Cursor key to view the Waypoints submenu. Waypoint [Name] Submenu NOTE: See Navigation Menu Tab for more Waypoints information. The Waypoint Submenu contains the following menu options: Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be used to represent the waypoint in the Chart and Combo Views. Delete allows you to delete a waypoint from the saved waypoints list. Go To allows you to select a waypoint and start navigation toward that waypoint, or add that waypoint to the end of the current route. [. . . ] Track Line (TRK): The Track Line is the planned line of travel between two waypoints, and it represents the most efficient path between the two points because it is a straight line. 321°, where 000° is North, 090° East, 180° is South, 270° is West). See Cross Track Error and Course Over Ground. Trackplotter: Trackplotter describes a navigation device that shows Present Position, along with Track, Waypoint, and Routes, but NO MAP in the background. [. . . ]