User manual HUMMINBIRD 797C2 SI COMBO

[. . . ] 531519-1_A - 797c2_Man_Covers. qxp 10/24/2006 3:38 AM Page 1 797c2 GPS Chartplotter Operations Manual 531519-1_A 531519-1_A - 797c2_Man_Covers. qxp 10/24/2006 3:39 AM Page 2 Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing topquality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. [. . . ] To cancel MOB navigation, press the RIGHT Cursor key once more. To avoid canceling MOB navigation, press the LEFT Cursor key. Remove Target (only if a Target is Active) Remove Target removes the waypoint target from the display. This menu choice will only appear when a target has already been applied to a waypoint. NOTE: See Add a Waypoint Target or Trolling Grid for more information. To Remove a Target: 1. Highlight Remove Target on the Navigation X-PressTM menu. Use the RIGHT 4-WAY Cursor Control key to remove the target. 89 531519-1_A - 797c2_Man_Eng. qxp 11/6/2006 5:53 AM Page 90 Remove Grid (only if a Grid is Active) Remove Grid removes the waypoint grid from the display. This menu choice will only appear when a grid has already been applied to a waypoint. NOTE: See Add a Waypoint Target or Trolling Grid for more information. To Remove a Grid: 1. Highlight Remove Grid on the Navigation X-PressTM menu. Use the RIGHT 4-WAY Cursor Control key to remove the grid. Sonar Window (Combo view only) Sonar Window sets the size of the Sonar Window in the Combo View. Sonar Window can only be accessed from the Combo View. To Set the Size of the Sonar Window in the Combo View: 1. Highlight Sonar Window on the Navigation X-PressTM menu. Use the LEFT or RIGHT 4-WAY Cursor Control keys to adjust the size of the sonar window. (Wide, Medium, Narrow, Default = Medium) 90 531519-1_A - 797c2_Man_Eng. qxp 11/6/2006 5:53 AM Page 91 Waypoint [Name] (Most recently-created waypoint) Waypoint [Name] allows you to view the waypoints submenu for the most recently created waypoint. NOTE: You must have pressed the MARK key at least once since you last powered up the Fishing System for this menu choice to appear. To view the Waypoint [Name] Submenu: 1. Move the cursor to the desired position and press the MARK key once to save a waypoint. Highlight Waypoint[Name] on the Navigation X-PressTM menu. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu. Waypoint [Name] Submenu The Waypoint Submenu contains the following menu choices: Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be used to represent the waypoint in the Chart and Combo Views. Delete allows you to delete a waypoint from the list of saved waypoints. Go To allows you to select a waypoint and start navigation toward that waypoint, or add that waypoint to the end of the current route. Target allows you to apply a target to a waypoint selected from the list of waypoints. Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints. 91 531519-1_A - 797c2_Man_Eng. qxp 11/6/2006 5:53 AM Page 92 Snapshot and Recording X-PressTM Menu (Snapshot and Recording View only) The Snapshot and Recording X-PressTM menu provides access to the image management and sonar recording functions. Press the MENU key once while in the Snapshot and Recording View to access the Snapshot and Recording X-PressTM menu. NOTE: For more information, see Snapshot and Recording View. Snapshot and Recording X-PressTM Menu 92 531519-1_A - 797c2_Man_Eng. qxp 11/6/2006 5:53 AM Page 93 Start Recording (optional-purchase MMC/SD Card, Snapshot and Recording View only) Start Recording allows you to start sonar recording from the Snapshot and Recording View. [. . . ] Track Line (TRK): The Track Line is the desired line of travel between two waypoints, and represents the most efficient path between the two points because it is a straight line. 321°, where 000° is North, 090° East, 180° is South, 270° is West). See Cross Track Error and Course Over Ground. Trackplotter: Trackplotter describes a navigation device that shows Present Position, along with Track, Waypoint, and Routes, but NO MAP in the background. [. . . ]