User manual HUMMINBIRD 798CI SI COMBO

[. . . ] 798c and 798ci SI Combo Operations Manual 531691-1_D Section Title Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing topquality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. [. . . ] (Off, On, Default = Off) Bottom Range (Sonar Zoom View only when Bottom Lock is On) Bottom Range allows you to control how much of the water column, measured up from the bottom, is shown in the Sonar Zoom View. Choose a small value to see low-lying bottom structure or details of the bottom return. Choose a larger value to see large structure in deeper water. NOTE: It is possible to set the Bottom Range to be greater than the depth. In this case, you may see surface clutter in a wavy band that mirrors changes in the depth. To adjust the Bottom Range: 1. In the Sonar Zoom View, highlight Bottom Lock on the Sonar X-PressTM Menu. Press the RIGHT Cursor key to change the Bottom Lock setting to On. Once Bottom Lock is on, Bottom Range will be added to the X-PressTM Menu. Highlight Bottom Range, and press the LEFT or RIGHT Cursor keys to adjust the setting. (10 - 60 feet, 2-10 fathoms, or 3-20 meters [International Models only], Default = 15 feet) Sonar X-PressTM Menu 104 Cancel Navigation (only when Navigating) Cancel Navigation discards the current route and exits Navigation Mode. This menu option will only appear when you are currently navigating a route. This will not delete a previously-saved route. Highlight Cancel Navigation on the Sonar X-PressTM Menu. Press the RIGHT Cursor key to initiate canceling navigation. To cancel navigation, press the RIGHT Cursor key once more. To avoid canceling navigation, press the LEFT Cursor key. 105 Sonar X-PressTM Menu Navigation X-PressTM Menu (Navigation Views only) The Navigation X-PressTM Menu provides a shortcut to your most frequently-used settings. Press the MENU key once while in the Bird's Eye, Chart, or Combo View to access the Navigation X-PressTM Menu. NOTE: Menu options will vary depending on system settings, such as whether you are currently navigating. NOTE: Menu options can be expanded or simplified by setting the User Mode to Advanced or Normal. NOTE: Transducer selection also influences menu options (see Sonar Menu Tab: Transducer Select). Navigation X-PressTM Menu Navigation X-PressTM Menu 106 Waypoint [Name] (Only with an active cursor on a waypoint) Waypoint [Name] allows you to view the Waypoints submenu for the waypoint under your cursor. Use the 4-WAY Cursor Control key to move the cursor onto an existing waypoint and press the MENU key once, or use Cursor to Waypoint to select a waypoint from the saved waypoints list. Highlight Waypoint [Name] on the Navigation X-PressTM Menu. Press the RIGHT Cursor key to view the Waypoints submenu. Waypoint Submenu NOTE: See Navigation Menu Tab for more Waypoints information. The Waypoint Submenu contains the following menu options: Edit allows you to edit the Name, Position (Latitude and Longitude), and select the Icon that will be used to represent the waypoint in the Chart and Combo Views. Delete allows you to delete a waypoint from the saved waypoints list. [. . . ] Track Line (TRK): The Track Line is the planned line of travel between two waypoints, and it represents the most efficient path between the two points because it is a straight line. 321°, where 000° is North, 090° East, 180° is South, 270° is West). See Cross Track Error and Course Over Ground. Trackplotter: Trackplotter describes a navigation device that shows Present Position, along with Track, Waypoint, and Routes, but NO MAP in the background. [. . . ]