User manual HUMMINBIRD 900 SCREEN CAPTURE

[. . . ] NOTE: If your unit does not have a MARK key, use the Preset View key on the far right and top of the keypad instead. 1. Enabling Screen Capture Turning on Screen Capture allows you to capture screen images using the MARK key (or far right Preset View key if your unit does not have a MARK key). All menus, dialog boxes, warnings and messages are captured and saved automatically. You can view these captures on the Screen Capture View, which shows thumbnails of the screen captures, three at a time. To turn on Screen Capture: 1. [. . . ] All rights reserved. 2 Screen Capture and Side Imaging Cursor 531452-1_A 3. Viewing Screen Captures 1. Make sure that the optional-purchase MMC/SD card used to capture the screens is installed in your card slot. Press the VIEW Key until you see the Screen Capture View. The Screen Capture View displays up to three thumbnails of these screen captures at a time. You can scroll through the whole list of thumbnails of screen captures in this view using the 4-WAY Cursor keys. The selected thumbnail will be highlighted with red arrows. See the full-sized image by selecting a thumbnail (using the Up or Down 4-Way Cursor keys), then using the Right 4-Way Cursor key to view the full image. A red border around the full-size screen capture indicates that it is just a screen capture, not a "live" view. You can delete the selected image, or all captured images, using Delete Image or Delete All Images from the X-PressTM menu. NOTE: You may view data files associated with each screen capture by removing the MMC/SD card from your unit and installing it in your optional-purchase MMC/SD card reader connected to a PC. Use Windows Explorer to see the contents of your MMC/SD card; you will notice that a . DAT (may show up as . TXT) file is created for every . BMP screen capture; this data file includes the thumbnail view, and is required in order to be able to view the screen capture from your 900 series unit, so don't delete these files. 4. Deleting Captured Images Once you have images captured and stored on your optional-purchase MMC/SD card, you may delete selected images, or all images at once, using the X-PressTM Menu when in the Screen Capture View. Delete Image (Screen Capture view only) Delete Image allows you to delete a single screen capture image from the Screen Capture View. This menu option is only available when you have an optional-purchase MMC/SD card installed and you are in Screen Capture view. To delete a single screen capture image: 1. From the Screen Capture View, select the image you want to delete, then highlight Delete Image on the X-PressTM Menu. Use the UP or DOWN 4-WAY Cursor keys to select the image name you want to delete. [. . . ] Since it is not possible to accurately determine the water depth off the boat's path, the depth is only displayed when the cursor is near the center line (the boat's path). You can mark a waypoint at the location of the Side Imaging cursor. The waypoint will be positioned off to the side of where the boat had been when the sonar return selected by the cursor was acquired. [. . . ]