User manual HUMMINBIRD AS GR16

[. . . ] GR16 GPS Receiver Accessory Manual 531478-1_B Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® accessory is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® accessory does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. [. . . ] Highlight Go To on the Navigation X-PressTM menu. Use the RIGHT 4-WAY Cursor Control key to begin navigation. Navigation will begin immediately if the Cursor is active or the Waypoint selection list will appear. Select a waypoint and navigation will begin immediately. 24 Waypoint [Name] (Only with an active cursor on a waypoint) Waypoint [Name] allows you to view the Waypoints submenu for the waypoint under your cursor. Move the cursor onto an existing waypoint and press the MENU key once, or use Cursor to Waypoint to select a waypoint from a list of saved waypoints. Highlight Waypoint[Name] on the Navigation X-PressTM menu. Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu, which contains the following menu choices: Waypoint Submenu The Waypoint Submenu contains the following menu choices: Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be used to represent the waypoint in the Chart and Combo Views. Delete allows you to delete a waypoint from the list of saved waypoints. Target allows you to apply a target to a waypoint selected from the list of waypoints. Grid allows you to apply a trolling grid to a waypoint selected from the list of waypoints. 25 Cursor to Waypoint (Chart or Combo view only) Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so that you can locate it or edit it. NOTE: This X-PressTM menu item appears only if you have saved waypoints. To move cursor to a saved waypoint: 1. Highlight Cursor to Waypoint on the Navigation X-PressTM menu. Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint. Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint you wish to move the cursor to, then use the RIGHT 4-WAY Cusor Control key to select the destination waypoint. Save Current Track Save Current Track allows you to save the current track being displayed. After the current track is saved, a new current track is started. Highlight Save Current Track on the Navigation X-PressTM menu. Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track. To save the current track, press the RIGHT Cursor key once more. To cancel saving the current track, press the LEFT Cursor key. Clear Current Track Clear Current Track allows you to clear the current track being displayed and start a new track at the present position. Highlight Clear Current Track on the Navigation X-PressTM menu. Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track. To clear the current track, press the RIGHT Cursor key once more. To cancel clearing the current track, press the LEFT Cursor key. 26 Skip Next Waypoint (Only When Navigating) Skip Next Waypoint removes the next waypoint from the current route. [. . . ] 321°, where 000° is North, 090° East, 180° is South, 270° is West). See Cross Track Error, Course Over Ground. Trackplotter: Trackplotter describes a navigation device that shows Present Position, along with Track, Waypoint, and Routes, but NO MAP in the background. Trolling Grid: Trolling Grid is a Humminbird® feature that displays a precise reference grid around a waypoint. [. . . ]