User manual HUMMINBIRD MARINE RADIO VHF5

[. . . ] OPERATIONS MANUAL TABLE OF CONTENTS Parts Supplied . . 11 Section 6: MAINTENANCE AND WARRANTY Maintenance . Section 7: TABLE OF MARINE CHANNELS PARTS SUPPLIED Before using the VHF5, please ensure the following parts are included in the box: · VHF5 Radio and Battery Pack · Antenna · Waterproof Pouch · Operations Manual If any of these items are missing, call our Customer Support Hotline. . 16 2 ASSEMBLING THE RADIO OTHER ACCESSORIES The following accessories are available from most Humminbird dealers, or direct through Humminbird Customer Support: Accessory · 12V Cigarette Lighter Adapter/Battery Eliminator · Speaker/Microphone Headset · Waterproof Pouch · Bulkhead Mount · NiCd Battery Pack and Battery Charger Battery Installation and Removal. [. . . ] The backlight stays illuminated for a few seconds. KEY PAD LOCK To active the keypad lock, press and hold the FUNC button then press the LIGHT/LOCK button. The PTT, 16 and LIGHT/LOCK buttons still operate while the keypad is locked. To unlock the keypad, press and hold the FUNC button then press the LIGHT/LOCK button. The key icon appears on the LCD when the keypad is locked. MONITOR The monitor function allows faint signals on a channel to be heard. To activate the monitor function, press and hold the FUNC button to hear all traffic on the current channel. Release the FUNC button when finished listening. 8 SCANNING FEATURES SCANNING ALL CHANNELS The VHF5 scans all channels in one of two modes: normal or priority scan. You may program the VHF5 to scan in either mode. In normal scanning, the VHF5 rapidly scans through channels, either in the USA or International band. The VHF5 stops scanning on busy channels and remains stopped several seconds after the signal disappears allowing time to answer the call if necessary. In priority scanning, the scanning operation is the same as normal scanning except Channel 16 is constantly checked for activity, allowing for much quicker response to Channel 16 traffic. To scan channels, press and hold the SCAN/DUAL button for a few seconds. The VHF5 begins scanning channels using the scan method programmed in the radio. To stop scanning, press the SCAN/DUAL button. Programming for Normal or Priority scanning: 1. Press and hold the FUNC button while turning the power on. Rotate the CHL/SQL knob to choose n-sc for normal scan, or p-sc for priority scan. Press the 16 button twice to store programming. Deleting Channels from Scan To delete a channel from scan, select the channel to be deleted. Press the FUNC and SCAN/DUAL buttons at the same time. L appears on the LCD, indicating the channel is locked out of scan. [. . . ] This does not include physical damage to the unit or its accessory items. Any modification or attempt to repair the original equipment or accessories by unauthorized individuals will void the warranty. Return the warranty registration card and retain your bill of sale for warranty verification. Accessories not manufactured under the Humminbird trade name are not covered by our warranty. [. . . ]