User manual HUMMINBIRD MATRIX 47

[. . . ] M47_Man_Eng_531338-1_A. qxd 12/13/2004 12:35 PM Page 1 MatrixTM 47 Operations Manual 531338-1_A M47_Man_Eng_531338-1_A. qxd 12/13/2004 12:35 PM Page 2 Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. [. . . ] Exit the Simulator by powering your MatrixTM Fishing System off. System Status Accessory Test Screen PC Connect (With PC Connect Cable Only) Use PC Connect to update the software of the MatrixTM control head. This feature requires the use of the PC Connect Cable. Complete instructions are included with the PC Connect Cable accessory. NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at www. humminbird. com or contact our Customer Resource Center at 1-800-633-1468. Simulator Exit PC Connect mode by powering your MatrixTM Fishing System off. System Status Use System Status to view system connections and to conduct a unit self-test. The following screens are displayed in turn when you press the VIEW button when using System Status: · Self Test · Accessory Test. System Status Self Test Screen 23 24 M47_Man_Eng_531338-1_A. qxd 12/13/2004 12:36 PM Page 30 Sonar X-PressTM Menu The Sonar X-PressTM Menu provides access to the settings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X-PressTM Menu. 3D Bottom Zoom (3D Sonar, 3D/2D Sonar Combo Views Only) 3D Bottom Zoom provides a magnified image of the bottom, and is only available on the X-PressTM Menu in the 3D Sonar View and the 3D/2D Sonar Combo View. Use 3D Bottom Zoom to increase the detail of the bottom on the display. Highlight 3D Bottom Zoom on the Sonar X-PressTM Menu. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the 3D Bottom Zoom setting. (Off, 1. 5x, 2x, 2. 5x, 3x, Default = Off) 3D Lower Range (3D Sonar, 3D/2D Sonar Combo, 6-Beam Sonar Views Only) 3D Lower Range sets the deepest depth range that will be displayed, and is only available on the X-PressTM Menu when you are in the 3D Sonar, 3D/2D Sonar Combo, or the 6-Beam Sonar View. When in automatic mode, the lower range will be adjusted by the unit to follow the bottom. Selecting a specific setting locks the depth range into Manual mode. For example, if you are fishing in 60 feet of water but are only interested in the first 30 feet (surface to a depth of 30 feet) you should set the Lower Depth Range limit to 30. The display will show the 0 to 30 foot range, allowing you to see a more detailed view than you would see if the display went all the way to the bottom. Sonar X-PressTM Menu To adjust the 3D Lower Range: 1. Highlight 3D Lower Range on the Sonar X-PressTM Menu. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Lower Range setting. (AUTO, 10 to 240 feet, 3 to 75 meters [International Models Only], Default = AUTO) 25 26 M47_Man_Eng_531338-1_A. qxd 12/13/2004 12:36 PM Page 32 3D History (3D Sonar, 3D/2D Sonar Combo Views Only) 3D History determines the speed at which the sonar information moves across the display, and consequently the amount of history shown, and is only available on the X-PressTM Menu when you are in the 3D Sonar or the 3D/2D Sonar Combo Views. A faster speed shows less history and is preferred by most anglers; however, the sonar information moves across the display quickly. A slower speed keeps the information on the display longer, but the bottom becomes compressed and may be difficult to interpret. Adjust 3D History to your personal preference. Highlight 3D History on the Sonar X-PressTM Menu. Use the LEFT or RIGHT 4-Way Cursor Control keys to increase or decrease the 3D History setting. [. . . ] See Finding the Cause of Noise for more information. Cavitation from the boat's propeller 55 56 M47_Man_Eng_531338-1_A. qxd 12/13/2004 12:36 PM Page 62 MatrixTM Fishing System Accessories Accessories customize the MatrixTM Fishing System to your needs and enable you to stay on the edge of new technology. When an accessory is connected to the MatrixTM Fishing System, additional menus and readouts are added automatically to the Main Menu System. Accessories available today that are supported by your MatrixTM Fishing System include: Temperature/Speed: purchase and plug in the Temperature/Speed accessory to your MatrixTM control head to get real time speed and temperature readouts, as well as a valuable Triplog function. NOTE: If an external Temperature/Speed (TS-W) or Temperature (TG-W) accessory is connected AND a transducer with temperature built in is connected at the same time, the TS-W or TG-W accessory will override the temperature which is built in to the transducer. Specifications 3D Depth Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 ft (75 m) 2D Depth Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]