User manual HUMMINBIRD MATRIX 67-FRENCH

[. . . ] For complete details, see the separate warranty card included with your unit. We encourage you to read this operations manual carefully in order to get full benefit from all the features and applications of your Humminbird® product. Contact our Customer Resource Center at either 1-334-687-0503 or visit our website at www. humminbird. com. WARNING!This device should not be used as a navigational aid to prevent collision, grounding, boat damage, or personal injury. [. . . ] Exit the Simulator by powering your Fishing System off. Simulator, Shown with Optional WeatherSenseTM Accessory System Status Accessory Test Screen Exit System Status by powering your Fishing System off. PC Connect (With PC Connect Cable Only) Use PC Connect to update the software of the Matrix control head. This feature requires the use of the PC Connect Cable. Complete instructions are included with the PC Connect Cable accessory. NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at www. humminbird. com or contact our Customer Resource Center at 1-334-687-0503. Exit PC Connect mode by powering the Fishing System off. 21 22 Sonar X-PressTM Menu The Sonar X-Press Menu provides access to the settings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X-PressTM Menu. NOTE: Upper Range only appears in Advanced User Mode when in Sonar, Split Sonar or Big Digits View. NOTE: Zoom Level only appears in Sonar Zoom View. TM To adjust the Sensitivity: 1. Highlight Sensitivity on the Sonar X-PressTM Menu. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Sensitivity setting. (Low = 1, High = 20, Default = 10) Upper Range (Advanced: Sonar, Split Sonar and Big Digits Views Only) Upper Range sets the shallowest depth range that will be displayed on the Sonar, Split Sonar and Big Digits Views. The Upper Range menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode) and can only be accessed from the Sonar, Split Sonar and Big Digits Views. Upper Range is often used with Lower Range. For example, if you are only interested in the area between 20 and 50 feet deep, you should set the Upper Depth Range to 20 and the Lower Depth Range to 50. Highlight Lower Range on the Sonar X-PressTM Menu. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Lower Range setting. (AUTO, 10 to 800/1000/1500 feet, 3 to 260/330/500 meters [International Models Only], Default = AUTO) NOTE: Settings are dependent on the depth capability of your particular Fishing System model. Bottom View Bottom View selects the method used to represent bottom and structure on the display. Inverse represents weak returns as dark pixels and strong returns as lighter pixels. This has the benefit of ensuring that weak signals will be clearly visible on the display. Structure ID® represents weak returns as light pixels and strong returns as dark pixels. This has the benefit of ensuring that strong returns will be clearly visible on the display. WhiteLine® highlights the strongest sonar returns in white resulting in a distinctive outline. This has the benefit of clearly defining the bottom on the display. Bottom Black displays all pixels below the bottom contour as black, regardless of signal strength. This has the benefit of providing a high contrast between the bottom and other sonar returns on the display. [. . . ] Low battery voltage may be affecting the power of signal transmission. Electrical noise from the boat's engine may be interfering with sonar reception. See Finding the Cause of Noise for more information. 49 50 Finding the Cause of Noise Electrical noise usually affects the display with many black dots at high speeds, and high sensitivity readings. One or more of the following sources can cause noise or interference: Possible Source of Noise Other electronic devices Matrix Fishing System Accessories Accessories customize the Matrix Fishing System to your needs and enable you to stay on the edge of new technology. [. . . ]