User manual HUMMINBIRD MMC CARD SOFTWARE UPDATE

[. . . ] 1 MMC Card Software Update Thank You Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by manufacturing top-quality, thoroughly reliable marine equipment. Genuine Humminbird® accessories offer the opportunity to upgrade and expand the capabilities of your Humminbird® product. 531415-1_A About Your MMC/SD Card Reader Following are instructions for using your MMC/SD Card Reader to download new versions of software from the Humminbird® website and then upload them to your Humminbird® fishfinder. [. . . ] If you have already registered your fishfinder, just log in from the homepage to see your product registration list. Downloading Software from the Humminbird® Website Plug the MMC card reader directly into any USB port on your PC, or plug the card reader into the extension cable, then plug the extension cable into the USB port (if your USB port is hard to reach). Go to the Humminbird® website and log in (www. humminbird. com). Click Software Downloads to find out whether there are software updates associated with your fishfinder waiting to be downloaded. NOTE: If there are no software updates waiting, you can also view Previous Downloads to download a previouslydownloaded version of software. To download a particular version of software, put an MMC card into the card reader and follow instructions on the screen. When the software download is complete, remove the MMC card from the card reader. 2 MMC Card Software Update Inserting the MMC Card into Your Fishfinder Make sure your Humminbird® fishfinder is powered down, then remove the MMC slot cover, and insert the MMC card into the slot (if your fishfinder has two slots, either slot can accept the MMC card. ) The label on the MMC card should face down and away from you so that you're looking at the back of the card. Press down on the card until it clicks into place. Uploading Software to Your Fishfinder Once the MMC card with the new software version is inserted into the MMC slot on your fishfinder, power up your fishfinder. A Confirmation message will appear that says you are wishing to replace one software version with another from the MMC/SD card. Press the RIGHT Cursor key once to select Yes and confirm the software update, or the LEFT Cursor key once to select No and abort the software update procedure. A second confirmation message will appear that will ask you will ask you if you want to abort the software replacement procedure. Press the LEFT Cursor key once to select No and continue with the software update. Press the RIGHT Cursor key once to select Yes and abort the software update. Once you have selected No and the software update is proceeding, a message will appear that says you are updating the software to a specific version, and telling you not to interrupt this operation. Once the software update is complete, a message will appear to tell you this, and the fishfinder will restart automatically. [. . . ] If you have any questions, call our Humminbird® Customer Resource Center at 1-800-633-1468. and Canada, hours are Monday-Friday, 8:00 a. m. Humminbird 678 Humminbird Lane Eufaula, AL 36027 www. humminbird. com [. . . ]