User manual HUMMINBIRD RF30 SMARTCAST INSTALLATION GUIDE

[. . . ] Thank You! Thank you for purchasing an RF30 SmartCast wireless fishfinder from Humminbird, America's #1 Manufacturer of quality consumer marine electronics. The RF30 SmartCast Wrist Sonar product comes in two models, the RF30 Wrist Mount, which has one RSS, and the RF30 SmartPack, which has two RSS units. For the RF30 Wrist Mount model, you should have: · One Remote Sonar Sensor - RSS(TM) - Channel A · One SmartCast Wrist Sonar with installed 2450CR battery · One extra 2450CR battery · SmartCast Wrist Sonar Operations Manual. For the RF30 SmartPack model, you should have: Attaching the RSS The line coming from your reel can be tied off to the front hole in the green Remote Sonar Sensor (RSS). If you wish to also use the RSS as a conventional float, use the second hole to attach your hook using a lighter weight line. [. . . ] Two A- or B-type RSS units used simultaneously, as well as one A- and one B-type RSS unit used simultaneously, can cause RF interference between each other. 7. The screen jumps and the bottom has an abrupt change; sometimes a vertical line is missing or a black line from top to bottom is displayed. SERVICE POLICY This Service Policy is valid in the United States only. This applies to Humminbird units returned to our factory in Eufaula, Alabama, and is subject to change without notice. All repair work is performed by factory-trained technicians to meet exacting factory specifications. Factory serviced units go through the same rigorous testing and quality control inspection as new production units. Even though you'll probably never need to take advantage of our incredible service guarantee, it's good to know that we back our units this well. We will make every effort to repair your unit within three working days from the receipt of your unit. This does not include shipping time to and from our factory. Units received on Friday are usually shipped by Wednesday, units received Monday are usually shipped by Thursday, etc. We reserve the right to deem any product unserviceable when replacement parts are no longer reasonably available or impossible to obtain. After the original warranty period, a standard flat rate service charge will be assessed for each repair (physical damage and missing parts are not included). Please call our Customer Resource Center to verify the service charge for your unit. If charges are not prepaid, the unit will be returned C. O. D. If you are experiencing problems related to bottom or depth readings, please send your RSS (Remote Sonar Sensor) along with your Wrist Sonar when sending for repair. Depth Range Press POWER-MENU until the Depth Range menu appears. Select AUTO to have the SmartCast automatically set the Depth Range. This locks the depth range to a specific setting. Default = AUTO. NOTE: In manual operation, if the water depth is greater than the depth range setting, the bottom will not be visible onscreen. Select AUTO to return to automatic operation. Troubleshooting Do not attempt to repair the RF30 Wrist Sonar or RSS yourself. We will provide replacement product without charge for any Techsonic Industries product not covered by this warranty, which is returned (freight prepaid) within the warranty period to the dealer from whom such products were purchased, or to us at the appropriate address. In any such case, Techsonic Industries products found to be defective and covered by this warranty will be replaced or repaired at Techsonic Industries' option, and returned to the customer. Techsonic Industries' sole responsibility under this warranty is limited to the repair or replacement of product which is, in Techsonic Industries' opinion, defective. Techsonic Industries is not responsible for charges connected with the removal of such product or reinstallation of replacement or repaired parts. [. . . ] The top of the display corresponds to the water surface, and the bottom of the display corresponds to the selected Depth Range (see Depth Range). The display varies as the area under the RSS changes. Reeling in the RSS at a slow and steady rate will allow you to graph the bottom for structure, detail and fish. Digital readouts provide precise information for bottom contour, depth and fish locations below the RSS. Check the battery position and make sure that the battery door is properly closed. [. . . ]