User manual HUMMINBIRD WIDE PARAMOUNT

[. . . ] INSTALLATION PREPARATION PARTS SUPPLIED PARTS SUPPLIED Before installing your new Humminbird fishfinder, please ensure the following parts are included in the box: · · · · · Fishfinder Transducer with 20' (6m) of cable and mounting hardware kit Mounting system and mounting hardware kit 6' (2m) power cable Publications kit It any of these items is missing, call our Customer Support Hotline. ACCESSORIES Humminbird offers a wide assortment of accessories that complement and expand the capability of your new fishfinder. These accessories are designed with the same high standards and are backed by the same one-year warranty. The Humminbird Accessory catalog included with your unit contains descriptions of the many accessories available and ordering information. [. . . ] Information on the near side of the bottom depiction represents the texture and composition of the bottom. Fish ID attaches fish returns to the bottom at a point which represents the left-right location of the return. Fish targets identified in the left beam are attached to the left side of the bottom depiction, fish targets seen in the right beam are attached to the right side of the bottom depiction. The boat icon represents the location of the user's boat relative to the on-screen information. Pressing VIEW again will select the Monster Digits View, which increases the size of key digital information so that it can be viewed from a great distance. Normal 2D information is displayed on the right side of the display. Pressing VIEW again will toggle the display back to the 2D view. If a Wide Side transducer is being used (see Using Alternative Transducers), the VIEW button is used to select one of four views available: Both, Left, Right, and Down. You can select "side" simulator to view this presentation even if a Wide Side transducer is not connected. The three lower buttons, MENU, UP ARROW, and DOWN ARROW work together to control the Wide Paramount menucontrolled user functions. Initially, there will be 8 user menus available. If you find that there are menus which are seldom used, these can be "hidden" from the normal menu sequence to simplify operation. MENU brings a menu on-screen for adjustment. In normal operation, pressing MENU repeatedly will cycle through all available menus. A menu remains on-screen for several seconds allowing user adjustment by means of the ARROW keys. If no adjustment is made in the allotted time, the menu disappears. If you need the menu to remain onscreen longer to study the adjustment options, press and hold MENU to keep the menu on-screen indefinitely. Once you release the MENU button, the menu will time out. Once a menu times out, it is still considered the active menu. The Active menu icon is displayed at the top left corner of the display in most modes. Pressing MENU will bring up the active menu. The UP ARROW and DOWN ARROW make adjustments to menu functions. On the left side of every menu there are UP ARROW and DOWN ARROW symbols. [. . . ] The Wide Paramount also has the ability to work with the Wide Side transducer. See Available Accessories for selection of the transducer. Wide Side Operation The Wide Side transducer is a specialized "sidelooking" transducer which is extremely useful for bank fishing or looking for bait fish in open water. The Wide Side transducer uses three different sonar elements which transmit signals to the left, right, and straight down from your boat. The downward beam is 200 kHz with a 24 degree area of coverage. [. . . ]