Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HUMMINBIRD XFM 9. We hope that this HUMMINBIRD XFM 9 user guide will be useful to you.
Lastmanuals help download the user guide HUMMINBIRD XFM 9.
Manual abstract: user guide HUMMINBIRD XFM 9INSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] We encourage you to read these instructions carefully to get full benefit from your Humminbird accessory. This accessory requires drilling a hole in the hull of the boat and installation should be referred to a qualified marine technician. Before installation please test the Transducer to ensure that no damage occurred during shipping. [. . . ] In addition to the hardware supplied with your transducer, you will need a drill, a small drill bit for a pilot hole, a 2" hole saw, marine sealant or slow curing epoxy. At the selected location, drill a small pilot hole Threaded Housing
ATTACHING THE TRANSDUCER
then a 2" hole using the hole saw, from outside the boat hull. If you are using a fairing block, drill the hole perpendicular to the water line. If you are mounting the transducer directly into the hull, drill the hole perpendicular to the hull. Transducer
2
Thoroughly clean and deburr the drilled hole and clean the outside of the hull. If you are using a fairing block, the block should be cut to match the angle of the deadrise of the hull. Two pieces will be required; one which is shaped to match the profile of the transducer body and mounts outside the hull. The second piece mounts inside the hull and provides a level surface for the fasteners. The design and fabrication of a fairing block varies greatly with different hull shapes, therefore it should be customized by a qualified marine technician. Temporarily install the transducer to check the fit, then apply a generous amount of marine sealant or slow curing epoxy inside the drilled holes, and along the mating surfaces of the transducer housing. If you are using a fairing block, seal the mating edges of the block as well. Insert the threaded housing into the drilled hole. From inside the boat hand tighten the wing nut onto the threaded housing. If the hull is wood it will swell when wet. [. . . ] Your Humminbird accessory is designed for trouble-free operation
CUSTOMER SUPPORT
and is backed by the same one-year warranty as our depthsounders, VHF Marine-band radios, and GPS Navigation equipment. Refer to your Humminbird product Operations Manual for the specific details of this warranty. If you have any questions, call our toll free Humminbird Customer Support Hotline:
1-800-633-1468
Throughout the U. S. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUMMINBIRD XFM 9
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HUMMINBIRD XFM 9 will begin.
