User manual HUNTER 37125

[. . . ] This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat or override this safety feature. [. . . ] Press the button repeatedly to change the length of time. Ionizer: Press this button to turn `on' the ionizer. When the ionizer is `on', the green light to the left of the button will be illuminated. Check Filter: When the check filter light is illuminated, you should open the front grill and compare the filter to the check filter chart. If the filter is dark, you should replace the filter. Reset: When you change the filter, press the reset button. Use the tip of a pen or pencil to press the reset button. AIR PURIFIER PARTS FIGURE 1 FRONT GRILL FRONT GRILL OPENS FROM BOTTOM Models 30110, 30125, 37125, 30140 and 30165 all open in the same manner. FORM 41304-01 3 ©1999 HUNTER FAN CO. Using Your Air Purifier 1. Remove your air purifier from the box and take it out of the clear plastic protective bag. Place your HEPAtechTM Air Purification System on a firm, flat surface. Before turning the Air Purifier `on', you need to open the front grill and remove any protective plastic that may be surrounding the HEPAtechTM filter. Release the front grill by pulling the grill forward near the bottom of the unit. The filter will be installed in the correct position. When you replace the filter in the unit, the white filter material should be facing outward (towards you) and the black carbon material should be hidden from view (inside the unit). Locate the top tabs in the unit first, and then push the bottom of the grill into the unit until it is closed. The unit is now ready for normal operation. NOTE: The unit will not operate unless the door is placed in the correct position. Plug the unit into a 120V electrical outlet. Cleaning And Filter Replacement (Models 30110, 30125, 37125, 30140 and 30165 use Replacement Filter 30925) 1. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. Be sure that all parts are completely dry before you reassemble them to the Air Purifier. When you remove the front grill to clean it, you should also remove the pre-filter from the front grill and gently wash it in soapy water. Washing the pre-filter can help extend the life of your HEPAtechTM Filter. [. . . ] You will be responsible for insurance and freight or other transportation to our factory service center. We will return the Air Purifier freight prepaid. The Air Purifier should be properly packaged to avoid damage in transit since we will not be responsible for any such damage. Proof of purchase is required when requesting warranty service. [. . . ]