User manual HUSQVARNA DM S240

[. . . ] GB Operator's manual sure Please read the operator's manual carefully and make ES Manual de instrucciones You understand the instructions before using the machine. The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Inspection and/or maintenance should be carried out with the motor switched off and the plug disconnected. [. . . ] Keep all parts in good working order and ensure that all fixtures are properly tightened. There is always a risk of crush injuries when working with products containing moving parts. Wear protective gloves to avoid body injuries. Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination. Ensure the switch is in the OFF-position before connecting to power source. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Never allow anyone else to use the machine without first ensuring that they have understood the contents of the operator's manual. Be careful as clothing, long hair, and jewellery can get caught in moving parts. Remain at a distance from the drill bit when the motor is running. Make sure that no pipes or electrical cables are routed in the area to be drilled. Never leave the machine unsupervised with the motor running. Always unplug the machine during longer work breaks. Never work alone, always ensure there is another person close at hand. Apart from being able to receive help to assemble the machine, you can also get help if an accident should occur. Do not store or transport the drilling machine with the drill bit fitted in order to protect your drilling machine and drill bits from damage. Store the drilling machine in a lockable area so that it is out of reach of children and unauthorised persons. Store the drilling machine and stand in dry and frost free conditions. It is our wish that you will be satisfied with your product and that it will be your companion for a long time. Think of this operators manual as a valuable document. By following its content (using, service, maintenance etc) the life span and the second-hand value of the machine can be extended. [. . . ] Check that the cord and extension cord are intact and in good condition. Inspection and/or maintenance should be carried out with the motor switched off and the plug disconnected. Clean the stand using a high pressure washer and then wipe dry. Tighten set screw to lock the guide roller shaft. [. . . ]